License Plate Lamp; Replacement Bulbs - Chevrolet Malibu 2015 Owner's Manual

10-32 Vehicle Care

License Plate Lamp

To replace one of these bulbs:
Passenger Side Shown, Driver
Side Similar
1. Push the release tab toward the
lamp assembly.
2. Pull the lamp assembly down to
remove.
3. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
4. Pull the bulb (2) straight out of
the bulb socket.
5. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install it into the lamp assembly.
6. Push the lamp assembly back
into position until the release tab
locks into place.

Replacement Bulbs

Exterior Lamp
Back-Up Lamp
Deck Lid Taillamp
DRL and Parking
Lamp (HID)
Front Fog Lamp
Front Parking Lamp
(Uplevel)
Front
Sidemarker Lamp
Front Turn Signal
Lamp (Base and
Uplevel)
Front Turn Signal
Lamp (HID)
High-Beam
Headlamp (Base)
High-Beam
Headlamp (Uplevel)
License Plate Lamp
Bulb
Number
921 LL
194
7443 ULL
H10
7443
W5WLL
7444NA
7443 NA
9005 LL
H7 LL
W5W LL