Chevrolet Malibu 2015 Owner's Manual page 184

To hear all of the numbers
recognized by the system, say
Verify at any time.
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Digit Store.
3. Say each digit, one at a time,
that you want to store. After
each digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered, say
Store, and then follow the
directions given by the system to
save a name tag for this number.
Using the Delete Command
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Delete.
3. Say the name tag you want to
delete.
Using the Delete All Name Tags
Command
This command deletes all stored
name tags in the Hands-Free
Calling Directory and the
Destinations Directory.
To delete all name tags:
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Delete all name tags.
Listing Stored Numbers
The list command will list all stored
numbers and name tags.
Using the List Command
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Directory.
3. Say Hands-Free Calling.
4. Say List.
Infotainment System
Making a Call
Calls can be made using the
following commands.
Dial or Call: The call command
can be used to call a phone number
or a stored name tag
Digit Dial: This command allows a
phone number to be dialed by
entering the digits one at a time.
Re-dial: This command is used to
dial the last number used on the cell
phone.
Using the Dial or Call
Command
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Dial or Call.
3. Say the entire number without
pausing or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.
7-27