Troubleshooting Power Recline Calibration - Quickie Rhythm Technical & Service Manual

Troubleshooting Power Recline Calibration.

1. Start by bringing the backrest into the
upright position.
Remove the shroud covering the backrest and
locate the ISM. (fi g. 6.2.1)
2. The recline Inhibit connector is the 2 pin
connector located at Inhibit 4 port in the ISM. (fi g.
6.2)
Left
Lights
Right
Lights
3. Check the recline potentiometer resistance
at the Inhibit 4 harness as shown. (fi g 6.2.2)
PAGE 6.2
Section 6
Actuator
Channels
Inhibit
4
1 2 3
4 5 6
Inhibit
5
Actuator
Channels
RHYTHM SERVICE MANUAL 2009 SUNRISE MEDICAL
fig. 6.2.1
fig. 6.2.2