Server Fault Indications Flowchart - HP ProLiant DL140 User Manual

40 HP ProLiant 100 Series Server User Guide

Server fault indications flowchart

Symptoms:
•
Server boots, but the internal health LED or external health LED is red or
amber
Possible causes:
•
Improperly seated or faulty internal or external component
•
Unsupported component installed
•
Redundancy failure
•
System overtemperature condition
Item
1
2
3
4
5
6
NOTE: For the location of server LEDs and information on their
statuses, refer to the server documentation.
Refer to
Server user guide, located on the Support CD or the HP
website (http://www.hp.com/products/servers/platforms)
System Management Homepage at https://localhost:2381
(https://localhost:2381)
"Power-On problems ("Power-on problems flowchart" on page
34)"
• "Hard drive problems (on page 53)"
• Server maintenance and service guide, located on the
Support CD or the HP website
(http://www.hp.com/products/servers/platforms)
"HP Insight Diagnostics (on page 22)"
• "Hardware problems (on page 41)"
• Server maintenance and service guide, located on the
Support CD or the HP website
(http://www.hp.com/products/servers/platforms)