HP ProLiant DL140 User Manual page 64

64 HP ProLiant 100 Series Server User Guide
b. Restart the server.
c. Run the communications software, checking settings and making
d. Restart the server, and then reestablish the modem connection.
Modem does not answer an incoming call
Action:
1. Enable the auto-answer option in the communications software.
2. Be sure an answering machine is not answering the line before the modem is
able to answer.
a. Turn off the answering machine.
b. Restart the server, and then reattempt the connection.
Modem disconnects while online
Action:
1. Be sure no loose connections (on page 23) exist.
2. Be sure no line interference exists. Retry the connection by dialing the
number several times. If conditions remain poor, contact the telephone
company to have the line tested.
3. Be sure an incoming call is not breaking the connection due to call waiting.
Disable call waiting, and then reestablish the connection.
AT command initialization string is not working
Action: Use the most basic string possible to perform the task. The default
initialization string is AT&F&C1&D2&K3.
corrections where needed.
-Or-
Reconfigure the auto-answer option to respond in fewer rings than the
answering machine.