Alfa Romeo MITO User Manual page 90

Folding the seats
Proceed as follows:
GETTING TO
KNOW YOUR CAR
❒ raise the head restraints to the maximum height, press both the
buttons A fig. 66 to the side of the two supports, then remove the
head restraints by sliding them upwards;
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
fig. 65
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
fig. 66
86
❒ move the seat belts to the side, making sure that they are correctly
extended and not twisted;
❒ lift the backrest retaining levers A fig. 67 and fold the desired
cushion forwards (a red band indicates that lever A is raised).
Repositioning the rear seat
Move the seat belts to the side making sure that they are correctly
extended and not twisted.
Raise the previously folded backrest until you hear the click of the
locking mechanism, visually checking that the red band on lever A fig.
67 has disappeared. The red band indicates that the backrest is not
secured.
Finally, reposition the head restraints, inserting them into their
housings.
A0J0081
fig. 67
A0J0083 A0J0082