Alfa Romeo MITO User Manual page 18

General failure (amber)
(for versions/markets, where provided)
GETTING TO
KNOW YOUR CAR
The warning light (or symbol on the display) switches on in the
circumstances indicated below.
In these circumstances, contact Alfa Romeo Authorized Services as
SAFETY
soon as possible to eliminate the fault.
Airbag failure warning light
(versions with multifunction display)
STARTING AND
The warning light switches on and flashes (together with a message on
DRIVING
the display) when a fault is detected with the airbag warning light
.
Exterior lights failure
IN AN EMERGENCY
See description for the
Brake lights failure
SERVICING AND
See description for "Brake lights failure".
MAINTENANCE
Fuel cut-off
This warning light comes on when the fuel cut-off inertia switch is
TECHNICAL
triggered. The display shows the dedicated message.
SPECIFICATIONS
Start&Stop failure
(for versions/markets, where provided)
The warning light comes on when a failure is detected in the
INDEX
Start&Stop system.
14
warning light.
Rain sensor failure
(for versions/markets, where provided)
See the description for the warning light.
Parking sensor failure
(for versions/markets, where provided)
See the description for the warning light.
Dusk sensor failure
(for versions/markets, where provided)
This warning light comes on when a dusk sensor failure is detected.
Engine oil pressure sensor failure
The warning light turns on when failure is detected in the engine oil
pressure sensor. The display shows the dedicated message.
Electric power steering failure
(for versions/markets, where provided)
The warning light comes on when an electric power steering failure is
detected.
Water in diesel filter
(for versions/markets, where provided)
The warning light switches on to indicate the presence of water in the
diesel filter.
Speed limit exceeded
(for versions/markets, where provided)
The warning light switches on when the speed limit set in the Setup
menu is exceeded.
When the car exceeds this value, on some versions a message and a
symbol are shown on the display and an acoustic signal is emitted.