Alfa Romeo MITO User Manual page 62

In combined function mode, functions are enabled together with those
already set when the relevant button is pressed. If a button whose
GETTING TO
function is already active is pressed, the operation is cancelled and the
KNOW YOUR CAR
corresponding LED switches off. To restore automatic control of the
air distribution after a manual selection, press the AUTO button.
When the driver selects air distribution to the windscreen, the air
distribution on the passenger side is also aligned to the windscreen.
SAFETY
The passenger can still select a different air distribution mode by
pressing the corresponding buttons.
ADJUSTING THE FAN SPEED
STARTING AND
Press button L to increase/decrease the fan speed. The speed is shown
DRIVING
by the lit bars on the display:
❒ maximum fan speed = all bars lit;
❒ minimum fan speed = one bar lit.
IN AN EMERGENCY
The fan can only be excluded if the climate control compressor has
been switched off by pressing button B.
IMPORTANT To restore automatic control of the fan speed after a
manual adjustment, press the AUTO button.
SERVICING AND
MAINTENANCE
AUTO BUTTONS
Press the AUTO buttons to make the system automatically adjust the
quantity and distribution of the air introduced into the respective areas
TECHNICAL
of the passenger compartment; all previous manual settings will be
SPECIFICATIONS
cancelled (this condition is indicated by the text FULL AUTO on
the display).
INDEX
58
By manually adjusting at least one of the functions automatically
managed by the system (air recirculation, air distribution, fan speed or
switching off the air conditioner compressor), the word FULL will
disappear from the display, indicating that the system is no longer
automatically controlling all the functions (the temperature will still be
controlled automatically).
IMPORTANT If the system is no longer able to reach/maintain the
requested temperature in the various areas of the passenger
compartment, the set temperature will flash and after approximately 1
minute the word AUTO will disappear.
To restore automatic control of the system after one or more manual
adjustments, press the AUTO button.
MONO BUTTON
Press the MONO button to align the passenger side air temperature
with that of the driver side. In this way it is also possible to set the
air distribution between the two areas by turning knob N.
This function makes temperature regulation easier when the driver is
travelling alone.
To return to separate management of the air temperature and
distribution, turn knob H to set the passenger side temperature or press
the MONO button when the LED on the button is on.