Audio Settings; Tone Adjustment (Bass/Treble); Balance Adjustment; Fader Adjustment - Alfa Romeo MITO User Manual

With the Mute function activated, it will be ignored when there is
an incoming traffic alert (if the TA function is activated), or if an
emergency alarm is received. The function will be reactivated when
the alert is over.

AUDIO SETTINGS

The functions that can be selected from the audio menu change
depending on the context: AM/FM/CD/AUX (for
versions/markets, where provided).
Press the AUDIO button briefly to change the Audio functions.
After the AUDIO button is first pressed, the display will show the
bass level value for the source activated at that time (e.g. in FM
mode the display will show the wording "FM Bass + 2").
Use the or buttons to scroll through the menu functions. To
change the setting of the function selected use the
The current status of the function selected will be shown on the
display.
The functions managed by the Menu are:
❒ BASS (adjustment of bass tones);
❒ TREBLE (adjustment of high tones);
❒ BALANCE (right/left balance adjustment);
❒ FADER (front/back balance adjustment);
❒ LOUDNESS (LOUDNESS function activation/deactivation);
❒ EQUALISER (activation and selection of factory-set equaliser
levels);
❒ USER EQUALISER (customised equaliser setting).
248

TONE ADJUSTMENT (bass/treble)

Proceed as follows:
❒ Use
or
menu;
❒ press the
treble.
By pressing the buttons briefly, the levels will change progressively
in steps. By pressing them for longer, the levels will change quickly.

BALANCE ADJUSTMENT

Proceed as follows:
❒ Select the "Balance" setting in the AUDIO menu using the
button;
or buttons.
❒ press the
or the button to increase the volume of the left speakers.
By pressing the buttons briefly, the levels will change progressively
in steps. By pressing them for longer, the levels will change quickly.
Select the value " 0
left audio outputs.

FADER ADJUSTMENT

Proceed as follows:
❒ Select the "Fader" setting in the AUDIO menu using the
button;
❒ press the
or the button to increase the sound from the front speakers.
By pressing the buttons briefly, the levels will change progressively
in steps. By pressing them for longer, the levels will change quickly.
buttons to set the "Bass" or "Treble" in the AUDIO
or button to increase/decrease the bass or
button to increase the volume of the right speakers
" to set the same level for the right and
button to increase the sound from the rear speakers
or
or