Alfa Romeo MITO User Manual page 29

Briefly press the SET/ button to go back to the menu screen or
hold the button down to go back to the standard screen without saving.
To cancel the setting, proceed as follows:
❒ briefly press the SET/
button, "On" will flash in the display;
❒ press the − button, the display flashes ("Off");
❒ briefly press the SET/
button to go back to the menu screen or
hold the button down to go back to the standard screen without
saving.
Headlight sensor (Automatic
headlight/dusk sensor sensitivity
adjustment)
(for versions/markets, where provided)
This function enables the headlights to come on or go off depending on
external lighting conditions.
The dusk sensor sensitivity can be adjusted according to 3 levels (level
1= minimum sensitivity, level 2= average sensitivity, level 3= maximum
sensitivity).
The higher the sensitivity set, the lesser is the external light variation
needed to switch the lights on (e.g. with a setting on level 3 at sunset
the headlights come on in advance in relation to levels 1 and 2).
Proceed as follows to set the desired adjustment:
❒ press the SET/
button briefly to make the display flash the
previously set level;
❒ press the "+" or "−" button to select;
❒ briefly press the SET/
button to go back to the menu screen or
hold the button down to go back to the standard screen without
saving.
Rain sensor (Rain sensor sensitivity
adjustment)
This function allows you to adjust the rain sensor sensitivity to 4 levels.
To set the required sensitivity level proceed as follows:
❒ briefly press the SET/
button, the previously set sensitivity level
will flash on the display;
❒ press the "+" or "−" button to adjust;
❒ briefly press the SET/
button to go back to the menu screen or
hold the button down to go back to the standard screen without
saving.
Activation/Trip B data
(Trip B enablement)
This function may be used to activate (On) or deactivate (Off) the Trip B
(partial trip). For further information see "Trip computer".
Proceed as follows to switch the function on and off:
❒ press the SET/
button briefly to make the display flash "On" or
"Off" according to what was previously set;
❒ press the "+" or "−" button to select;
❒ briefly press the SET/
button to go back to the menu screen or
hold the button down to go back to the standard screen without
saving.
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
25