Related Manuals for Medion AKOYA X55005
Summary of Contents for Medion AKOYA X55005
- Page 1 60 cm / 23,6" Wide Screen Multimedia Monitor + LED Backlight MEDION AKOYA ® ® X55005 (MD 20160) Bedienungsanleitung Instruction Manual Mode d'emploi Manual de instrucciones Betjeningsvejledning Handleiding...
-
Page 2: Table Of Contents
Contents Information about these instructions ................... 2 Target group ..............................2 Service ................................2 The symbols and signal words used in these Instructions................2 Use in accordance with regulations ....................2 Scope of supply ..........................3 ... -
Page 3: Information About These Instructions
Information about these instructions Read through these instructions carefully and follow all the information given under all circumstances. You will guarantee reliable operation and a long useful life of your TFT monitor in this way. Always keep these instructions ready to hand, close to your TFT monitor. Keep the instructions safe, in order for you to be able to pass them on to a new owner, in the case of you selling the monitor. -
Page 4: Scope Of Supply
Scope of supply Please check the items received in the box and inform us within 14 days from purchase if anything is missing. You should receive the following items: TFT monitor FSP 036-DGAA1 power pack 15-pin D-Sub data cable ... -
Page 5: Safety Information
Safety information Caution! Pay attention to operational safety. The device is not intended to be used by individuals with restricted physical, sensory or intellectual abilities (including children), or a lack of experience and/or knowledge, unless they are supervised by an individual responsible for their safety or have received instructions about how the device is to be used from such a person. -
Page 6: Repair
Repair Leave the repair of your TFT monitor exclusively to qualified specialist personnel. Please contact our authorised Service Partners exclusively in the case of a necessary repair. Caution! Pay attention to the surrounding temperature! The TFT monitor can be operated at a surrounding temperature from 0° C to +35° C and at a relative ambient moisture level of <... -
Page 7: Information About Conformity
(Commission Regulation 1275/2008). This monitor is ENERGY STAR® compliant. As an ENERGY STAR®-Partner, MEDION ensures, that this device complies with the ENERGY STAR® guidelines for optimal power consumption. Maintain at least one metre clearance from high frequency and magnetic sources of interference (television device, loudspeakers, mobile phone, cell phone, etc.), in order to avoid disruptions to function... -
Page 8: Bringing The Device Into Operation
Bringing the device into operation Information Please read the “Safety information” chapter on page 4 under all circumstances before bringing the device into operation. Setup Attach the stand of the TFT monitor as illustrated. Carry out this step before connecting the monitor. (Ill.: Installation of the monitor stand) Take the TFT monitor down as shown in the drawing. -
Page 9: Supported Monitor Settings
Supported monitor settings This TFT monitor supports the following modes. Resolution Horizontal Frequency Vertical Frequency 720 x 400 31,47 kHz 70 Hz 640 x 480 31,47 kHz 60 Hz 640 x 480 31,47 kHz 67 Hz 640 x 480 37,8 kHz 72 Hz 640 x 480 37,5 kHz... -
Page 10: Monitor Settings Under Windows Xp
Monitor settings under Windows XP You will make the screen setting in ‘Display Properties’ in the Windows program under Windows XP. The program can be started as follows: Right mouse-click on the Windows interface (Desktop) and left mouse-click on „Characteristics“. ... -
Page 11: Monitor Settings Under Windows Vista
® Monitor settings under Windows Vista You will make the screen settings in ‘Personalize appearance and sounds’ Windows program under Windows Vista®. The program can be started as follows: Right mouse click on the Windows interface (Desktop) and left mouse click on ‘Personalize’. ... -
Page 12: Connections On The Back
Connections on the back (Ill.: Rear of the monitor) Power supply (POWER IN) DVI-D 24-Pin connection (DVI) HDMI connection (HDMI) Mini 15-pin D-sub connection (VGA) 3.5 mm stereo jack audio connection (AUDIO IN) Connecting the monitor Ensure that the TFT monitor has not yet been connected to the electricity supply (mains plug not yet plugged in) and that neither the TFT monitor nor the computer has been switched on. -
Page 13: The Video Workstation
The video workstation Please pay attention to the following: The monitor device should be set up so that mirror effects, fading and strong contrasts between light and dark are avoided (even if the view from the window is still so attractive!) (Ill.: Setting up of the monitor) (Ill.: Video workstation) ... -
Page 14: Operating Elements
Operating elements (Ill.: Front operating elements) Sensor key Description You will start the OSD (On Screen Display) with this button. Press this button again if you wish to leave the OSD. + Power block, when the OSD is not activated ... -
Page 15: Changing The Parameters Of The Tft Monitor
Changing the parameters of the TFT monitor The On Screen Display (abbreviation: OSD) is a menu that is briefly faded in across the TFT monitor. You will be able to set certain parameters of the TFT monitor through the OSD menu. Operating the OSD menu Touch the sensor key, to activate the OSD. - Page 16 Menu point Function / sub-menu Automatic adjustment: Sets the horizontal and vertical position, phase (fine tune) and clock cycle (H size) automatically. Contrast: Sets the white value of the monitor foreground. Brightness: To adjust the brightness of the video. DCR: You can switch the DCR function (dynamic contrast) on and off here. ECO: Turn ECO on and off.
-
Page 17: Energy-Saving Properties
OSD time out: For switching off the On Screen Display (OSD) automatically after the expiry of a preset period of time. OSD background: Enables the OSD background to be switched on and off. Memory Recall): To recreate the factory settings for controlling video and audio. Energy-saving properties This monitor will switch to various energy-saving statuses set in advance by the respective computer / operating system. -
Page 18: Customer Service
Customer Service Solving problems Make sure that the TFT monitor has been installed correctly (read the “Bringing into operation” chapter from Page 6), if problems with your TFT monitor arise. Read the information in this chapter about possible solutions if the problems continue to exist. -
Page 19: Driver Information
The installation of a driver can differ according to the operating system. Follow the specific instructions for your operating system. www.medion.com Do you need further support? Please contact us if the suggestions in the above sections have not solved your problem. It would help us very much if you make the following information available to us: ... -
Page 20: Cleaning
MEDION follows the strict and transparent requirement of the ISO 13406-2, Class II Norm, which are summarised in brief in the following, in the handling of guarantees for all TFT display products for this reason. -
Page 21: Reproduction Of This Handbook
Types of pixel error: Type 1: Pixels shining for a long time (bright, white point), although not activated. A white pixel arises because of the illumination of all three sub-pixels. Type 2: Pixels not shining (dark, black point), although activated ... -
Page 22: Technical Data
Copyright © 2010 All rights reserved. This Handbook is protected by copyright. The copyright is the property of the Medion® Company. Trademark: MS-DOS® and Windows® are registered trademarks of the Microsoft® Company. Pentium® is a registered trademark of the Intel® Company. -
Page 23: Warranty Terms For United Kingdom
This warranty shall be void and you may be required by MEDION to reimburse MEDION for the reasonable costs of postage and packaging before MEDION will return the product to you. If so and you would still like MEDION to repair or replace the product, MEDION may do so but you will be charged MEDION’s standard rates for repair and... - Page 24 If it is found during repair or assessment that the defect concerned is not covered under warranty, MEDION reserves the right to invoice you for all reasonable costs incurred by MEDION. These costs will be in relation to the return of the product, including reasonable administration costs, plus reasonable costs for materials used and labour provided when repairing or replacing the product.
- Page 25 100% accuracy of the maps provided with the Navigation device. It may be necessary to delete all data in the product in order to repair the MEDION product. PLEASE MAKE SURE THAT YOU HAVE A BACKUP COPY OF ALL DATA ON THE PRODUCT BEFORE RETURNING THE PRODUCT TO MEDION.
Need help?
Do you have a question about the AKOYA X55005 and is the answer not in the manual?
Questions and answers