Contents Overview ..................4 Device parts ..................6 About these operating instructions ..........7 Proper use ..................8 Declaration of conformity ............... 9 Safety instructions ................ 10 Operating safety ...................10 Installation location ................11 Repairs ....................12 Environmental temperature .............12 Power supply ..................13 Package contents ................14 Using the device for the fi...
Device parts The operating LED displays the operating state Multi function dial to operate the device Mounting plate Loudspeaker Opening for Kensington® lock Locking button for fi xing the stand Monitor post 5 A – connection for power supply D C I N 1 2 V D V I –...
About these operating instructions About these operating instructions Thank you for choosing our product. We hope you enjoy using it. Read the safety instructions carefully before using the device for the fi rst time. Note the warnings on the device and in the operating instructions. Always keep the operating instructions close to hand.
Proper use Proper use This TFT monitor is designed exclusively for the playback of video and audio signals from external devices, such as computers, whose connections and screen resolutions match the specifi ed technical data of the TFT monitor. Any other use is deemed as improper. •...
Declaration of conformity Declaration of conformity MEDION AG hereby declares that the MD 21473 conforms to all relevant Australian requirements: • EMC Directive 2014/30/EU • Low Voltage Directive 2014/35/EU • Ecodesign Directive 2009/125/EC However, the device is not equipped with a full function for minimising power consumption in accordance with the Ecodesign Directive.
Safety instructions Safety instructions Operating safety • This device may be used by children over the age of 8 and by persons with limited physical, sensory or mental abilities or by those without experience and knowledge, if they are super- vised or have been instructed in the safe use of the appliance and have understood the dangers that result from it.
Safety instructions Installation location • Keep your monitor and all connected devices away from mois- ture and avoid dust, heat, direct sunlight and naked fl ames (such as candles, for instance). Non-compliance with these in- structions can lead to faults or damage to the monitor. •...
Safety instructions Repairs • Contact customer services if: − the power cable is burnt or damaged − liquid has penetrated the monitor − the monitor is not operating correctly − the monitor has been dropped or the housing is damaged. •...
Safety instructions Power supply DANGER! Risk of electric shock! Even when the device is switched off, some components are live. − In order to disconnect the power to your monitor or to com- pletely isolate the device from voltage sources, remove the mains plug from the mains socket.
Package contents Package contents Please check your purchase to ensure that all items are included. If anything is miss- ing, please contact us within 14 days of purchase. The following items are supplied with your monitor: • Monitor • HDMI cable •...
Using the device for the fi rst time Mounting Attach the monitor stand as shown in the illustration. Carry out these steps before connecting up the monitor. − Use the preassembled screw and a slotted or Phillips screwdriver to tighten the foot on the post −...
Using the device for the fi rst time Setting up and positioning Avoid dazzle, refl ections and strong bright-dark contrast in order to protect your eyes. The monitor should never be placed next to a window because this is the brightest part of the room in daylight.
Page 17
Using the device for the fi rst time 50 - 60 cm 40 - 45° 90° • In general – change your position frequently (around every 20-30 minutes) and take regular breaks to avoid tiredness. • Back – when sitting at your workstation, your back must be supported by your chair’s backrest, which must be upright or angled slightly back.
Using the device for the fi rst time Connecting In order to avoid any damage or malfunctions, only connect the connection cable when the monitor and the computer are switched off. Connecting the signal cable − Insert the signal cable into either the D V I , H D M I or D P connec-...
Using the device for the fi rst time On-screen display (OSD) menu You can change various settings via the screen menu. The device is operated via the multifunction dial on the rear panel. − Move the multi function dial to the right to activate the OSD. −...
Power-saving features MPRT Moving Picture Response Time (MPRT) can reduce the degree of the perceived motion blur RESET Reset the device to the factory settings. The menu disappears automatically if you do not touch any button at the monitor within the preset time. Power-saving features This monitor switches to different power-saving modes which are specifi...
Troubleshooting Troubleshooting If problems occur with your monitor, make sure that the monitor has been properly installed. If the problems persist, then read this section for information about possible solutions. Picture interference or no picture • The mains cable must be fi rmly seated in the socket and the power switch (if available) must be switched on.
Pixel defects on screens Pixel defects on screens For active matrix TFTs with a resolution of 5 Pixel 2,560 x 1,440 pixels, which are each made up of three sub-pixels (red, green, blue), there are a to- tal of approximately 11 million control transistors Rows in use.
Recycling and disposal Recycling and disposal If you have any questions about disposal, please contact your sales agent or our ser- vice centre. PACKAGING The product has been packaged to protect it from damage in transit. The packaging is made of materials that can be recycled in an environmentally friendly manner.
Technical data Technical data Device Model X52773 (MD21473) Power consumption Standby: < 0.5W In operation: < 35W (max) Audio output 2 x 2W max. via speakers Power adaptor Manufacturer FSP Group Inc. Model number FSP060-DIBAN2 Input voltage 100–240V ~ 50-60Hz 1.5A (max) Output voltage DC 12V 5.0A...
• In our Service Community, you can meet other users, as well as our staff, and you can exchange your experiences and pass on your knowledge there. You will fi nd our Service Community at http://community.medion.com. • Alternatively, use our contact form at www.medion.com/au/contact.php •...
These operating instructions are protected by copyright. Mechanical, electronic and any other forms of reproduction are prohibited without the written permission of the manufacturer. Copyright is owned by the distributing company: MEDION AG Am Zehnthof 77 45307 Essen Germany Please note that you cannot use the address above for returns. Please always contact...
Page 27
AFTER SALES SUPPORT 11692 1 300 884 987 www.medion.com.au YEAR MODEL: WARRANTY 10/2019 MD21473...
Need help?
Do you have a question about the Erazer X52773 and is the answer not in the manual?
Questions and answers