Sb Lower Case Unit Assembly; Flah-Up Spring - Nikon D80 VBA14001 Repair Manual

SB lower case unit
・ Attach [#B341] and [#B342].
・ Mount the SB lower case unit (#B2302) on the top cover.
・ Insert the SB-case rotate shaft (#306) in the top cover.
・ Insert the collar (#308) in the top cover, and fix it by hooking at two places.
・ Pass each wire through the hole (#308).
Grease: MZ-800S
Grease: MZ-800S
Flash-up spring
・ Put the flash-up spring (#305).
・ Fix it with the screw (#650).
・ Hook the flash-up spring (#305) by following the direction of the arrow.
#305
#650
- Ａ  ･
Arrangement of built-in SB wires
Be careful so that the wires do NOT
touch the SB POP UP SW.
Dipping
Grease: MZ-800S
-
VBA14001-R.3694.A