Kingston Technology DT4000M-R User Manual page 7

Device Initialisation (Windows Environment), Continued:
Clicking 'No' will prevent the DT4000M-R from registering with SafeConsole and it will
initialise as a standalone drive. This message box will continue to appear each time the
device is plugged in, until you opt to register with SafeConsole.
2. Select a password. Non-managed and standalone drives require a password with the
following criteria (
Minimum of eight (8) characters, including 1 upper-case, 1 lower-case and 1 digit
Managed drives require passwords that meet the criteria set forth in the policy of the
SafeConsole management server.
3. Once a password has been selected (and it meets the specified criteria), you must enter
it a second time in the 'Confirm Password' text box to ensure proper entry.
4. Click the checkbox to accept the warranty statement.
5. Click [Confirm] to complete initialisation.
Document No. 480DT4000M-R.A01
):
Figure 3.3
Figure 3.3 – Confirm password
Managed-Ready Solution Page 6 of 14