Device Initialisation (Windows Environment) - Kingston Technology DT4000M-R User Manual

Device Initialisation (Windows environment)

DT4000M-R can be initialised in one of two ways: standalone or managed. When you insert
the drive into a USB port on the host, DT4000M-R will look for a 'safestick' registry key which
provides the location of the SafeConsole server:
(*Note: You can also use the Windows installer from the SafeConsole's deployment page.)
HKey_Current_User\Software\BlockMaster\DT4000M-R
If the registry key does NOT exist, DT4000M-R will bypass the management option and allow
you to initialise the device as a standalone drive. If the registry key DOES exist, a message
box prompt is displayed that allows you to decide whether or not the DT4000M-R drive will be
managed.
Figure 3.1
1. Decide whether DT4000M-R will be managed or not.
Clicking 'Yes' will register DT4000M-R with SafeConsole and inherit the policies that are
in place on the management console, including password criteria, device auditing and
other managed features. To confirm ownership of this device, you will be prompted for
the credentials of the local host/domain user prior to initialisation.
The DT4000M-R will remain in the managed state until the device is reset.
next page.
Document No. 480DT4000M-R.A01
Figure 3.1 – Found SafeConsole
Figure 3.2 – Confirm ownership
Managed-Ready Solution
Figure 3.2
Continue on
Page 5 of 14