JVC XV-NA7SL Instructions Manual page 57

Direct selection
¶ During playback or while stopped
1
Press TITLE/GROUP.
[--] is shown in the Group display area of the
display window.
(Front panel display window example)
Group display
area
2
Use the numeric buttons to specify a desired
Group number.
• To select a number between 1 and 10:
Press the corresponding button for the number.
• To select a number higher than 10:
Use the +10 button.
Examples:
To select 13: +10
To select 34: +10
To select 40: +10
Specify the Group number within several seconds
after pressing TITLE/GROUP (i.e. while the display
window shows [--] for the Group number, instead
of the current Group number).
3
Use the numeric buttons to specify a desired
file number.
You can specify the file number according to the
order in the JPEG CONTROL display. You must
specify a file number within 5 seconds after
carrying out step 2.
The unit starts slide show playback from the
specified File. If you do not specify a file number,
the unit starts slide show playback from the first
File in the Group.
Hints
• You can skip a File in the slide show by using 4/¢ or
5/∞.
• You can select a File in the current Group by using the
numeric buttons.
Current File
number
3
+10 +10 4
+10 +10 10
NOTES
• To stop slide show playback (to dismiss the picture) in
the middle of slide show playback:
Press 7 or MENU.
The TV screen returns to showing the JPEG CONTROL
display.
Pressing 3 resumes slide show playback from the last
picture you displayed.
• To keep showing the current picture while in slide
show mode:
Press 8 or ENTER.
The picture does not change to the next picture.
Pressing 3 resumes the slide show playback from the
next picture.
• If a black screen appears continuously in the slide show
playback:
The file currently displayed may be non-baseline JPEG
file. In this case, select a playable File (a baseline JPEG
file) again (e.g., pressing 7 or MENU to open the JPEG
CONTROL display, etc.).
Note that it may take a long time to select another File.
JPEG disc playback
55