Napoleon HD35NT Installation And Operating Instructions Manual page 28

28
fIgure 4.0
70"*
framIng dImensIons
ref
a
* Allow for finished floor and hearth thickness when setting these dimensions.
** When constructing the enclosure allow for finishing material thickness to maintain clearances.
W415-0750 / 12.17.08
Do not build into this area - it must be left clear to provide
adequate clearance for the vent in this 14" wide area centered
along the front of the fireplace. No combustibles are allowed.
1 1/2"
MAX
20 1/4"**
hd35 hd40
35 3/4" 40 3/4"
WARNING
!
3 1/2" MAX
14" MIN
41 1/4"*
A