Table of Contents
Advertisement
User Guide
Maintenance, Cleaning and Repair
This section describes cleaning and storing the MC75A-NI, as well as possible procedures when problems occur
while using the MC75A-NI.
Maintenance
For trouble-free service, observe the following tips when using the MC75A-NI:
•
Do not scratch the screen of the MC75A-NI. When working with the MC75A-NI, use the supplied stylus or
plastic-tipped pens intended for use with a touch-sensitive screen. Never use an actual pen or pencil or
other sharp object on the surface of the MC75A-NI screen.
•
A screen protector, p/n KT-67525-01R, is applied to the MC75A-NI. Motorola recommends using this to
minimize wear and tear. Screen protectors enhance the usability and durability of touch screen displays.
Benefits include:
•
Protection from scratches and gouges
•
Durable writing and touch surface with tactile feel
•
Abrasion and chemical resistance
•
Glare reduction
•
Keeping the device's screen looking new
•
Quick and easy installation.
•
The touch-sensitive screen of the MC75A-NI is glass. Do not to drop the MC75A-NI or subject it to strong
impact.
•
Protect the MC75A-NI from temperature extremes. Do not leave it on the dashboard of a car on a hot day,
and keep it away from heat sources.
•
Do not store or use the MC75A-NI in any location that is dusty, damp, or wet.
•
Use a soft lens cloth to clean the MC75A-NI. If the surface of the MC75A-NI screen becomes soiled,
clean it with a soft cloth moistened with a diluted window-cleaning solution.
•
Periodically replace the rechargeable battery to ensure maximum battery life and product performance.
Battery life depends on individual usage patterns.
•
Change the re-chargeable battery regularly to ensure maximum battery life and equipment performance.
Battery life depends on the individual usage pattern. The battery provides a state display to estimate the
remaining life. You can find further information in chapter "Battery Maintenance".
•
Pay attention that the scan window is not scratched. Clean the window regularly. Dust, contaminants and
scratches on the scan window can lead to visible spots on the pictures taken with the scanner.
•
The battery should be completely charged before it is used for the first time. Note that the maximum
capacity of the battery is not attained until after approx. 5-6 charging and discharging cycles.
39
Advertisement
Table of Contents
