Table of Contents
Advertisement
User Guide
After completing initial MC75A6 NI setup or after replacing a SIM card:
6.
Press the red Power button.
a.
On the Today screen, tap the Antenna icon and select Wireless Manager in the dialog box.
b.
Ensure Phone is on.
c.
Press the red Power button to suspend the MC75A6 NI.
d.
Perform a warm boot. See
e.
Make a call to verify cellular connection.
f.
NOTE You can find detailed information about WWAN activation and settings in the MC75A Integrator
Guide.
Battery
Information about the Battery
The batteries from Motorola (See
with the internal production control procedure) have been developed and manufactured in accordance with the
highest industrial standards. The battery's operating time or storage time is limited. The actual service life of a
battery is affected by various factors, e.g. heat, cold, tough operating environment and a fall from a great height.
Storing a battery for longer than six months can have a lasting negative impact on its power. Keep the batteries
in a dry, cool place. Take the batteries out of the device when storing for a long time in order to prevent
self-discharge, rusting on metal parts and leaking electrolyte.
Batteries that are to be stored for the duration of ½ year or longer should be recharged at least every 3 months
and discharged again. If electrolyte leaks, avoid touching the affected areas and dispose of the batteries in
accordance with regulations. Replace the battery when a significant reduction in operating time is noticed.
Batteries must be recharged at a temperature between 0 °C and +40 °C (32 °F to 104 °F).
The standard guarantee period for all Motorola batteries is one year, whereby it is insignificant whether or not the
battery was acquired separately or included with the MC75A-NI.
CAUTION The battery may only be charged and changed outside the hazardous area.
Ensure that only original batteries of the following types are used in safety-oriented operation.
82-71364-05NI with 3.7 V/3600 mAh or 82-71364-06NI with 3.7 V/4800 mAh.
The use of imitation batteries or batteries from other manufacturers will render the type of
ignition protection ineffective and there will then be a risk of fire or explosion.
Resetting the MC75A-NI on page
Accessories on page 37
33.
for the list of the batteries assessed in accordance
25
Advertisement
Table of Contents
