Table of Contents
Advertisement
Changing the initial settings
5/∞
Making fine tuning for your speakers
You can make fine tuning to match your speaker system.
Preparation
Set [ANALOG OUT] in the [AUDIO] preference display to
[MULTI CHANNEL] and [MODE] in the [SPK.SETTING]
preference display to [EXPERT].
Setting the speaker sizes and the BASS
REDIRECT function
1
Bring up the SPK.SETTING menu.
2
Press 5/∞ to move
ENTER.
The [SIZE] display page appears on the TV screen.
SIZE
FRONT SPEAKER
LARGE
CENTER SPEAKER
SMALL
SURROUND SPEAKER
SMALL
BASS REDIRECT
SUB WOOFER
RETURN
SELECT
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
ENTER
TO EXIT, PRESS CHOICE.
3
Press 5/∞ to select the speaker to be set and
press ENTER.
FRONT SPEAKER:
front speakers
CENTER SPEAKER:
center speakers
SURROUND SPEAKER: surround speakers
4
Press 5/∞ to select the size and press
ENTER.
LARGE: large speaker(s) which can fully reproduce the low-
frequency range.
SMALL: small speaker(s) which cannot fully reproduce the
low-frequency range.
NONE: no speaker(s) connected.
5
Repeat steps 3 and 4 if you want to set other
speakers.
When you use the small speakers which do not fully
reproduce the low-frequency range, you can boost up the
low-frequency signal of the subwoofer or front speakers by
setting the BASSS REDIRECT function.
To set the BASS REDIRECT function, go to step 6.
40
ENTER
to [SIZE] and press
6
Press 5/∞ to select [BASS REDIRECT] and
press ENTER.
7
Press 5/∞ to select [SUB WOOFER] or
[FRONT L/R] and press ENTER.
SUB WOOFER: The low-frequency signal fed from the
subwoofer output is boosted up.
FRONT L/R: The low-frequency signals fed from the front
speaker outputs are boosted up. No audio is output from
the subwoofer.
To return to the [SPK.SETTING] page
5/∞
Press
to move
to [RETURN] and press ENTER.
NOTES
• The [BASS REDIRECT] setting is effective only when at least
any one of the speaker sizes is set to [SMALL].
• No audio is output from the SUBWOOFER jack when [FRONT
L/R] is selected.
• If the front speaker size is set to [SMALL], the [BASS
REDIRECT] setting is fixed to [SUBWOOFER].
• During playback of a DVD AUDIO, audio signal may not be
output correctly depending on the conditions of the unit or the
disc itself.
Advertisement
Table of Contents
