3. Enter the area code and phone number to which you want your calls forwarded.
4. Tap
. (You will hear a tone to confirm the activation of Call Forwarding.)
Deactivate Call Forwarding
1. Press
and tap
2. Tap
3. Tap
. (You will see a message and hear a tone to confirm the deactivation.)
In-Call Options
While you're on a call, you will see a number of on-screen options. Tap an option to select it.
Add call: d isplays the keypad so you can dial another call.
n
Keypad: d isplays the keypad, where you can enter numbers using DTMF (Dual Tone Multi-
n
Frequency). This can be useful if you need to enter an access code or other information while on
an active call.
End call: t erminates the call.
n
Speaker: c ontrols whether the call audio plays through the speaker or the earpiece.
n
Tap Speaker to play the audio through the speaker. (You can adjust the speaker volume
l
using the Volume Key.) A green line appears under the Speaker button.
Tap Speaker again to use the phone's earpiece. The green line will disappear when
l
Speaker is not activated.
Warning! Because of higher volume levels, do not place the phone near your ear during
speakerphone use.
Mute: t urns the onboard microphone either on or off.
n
Tap Mute during a call to mute the microphone. A green line will appear under the Mute
l
button.
Tap Mute again to unmute the microphone. The green line will disappear when Mute is not
l
activated.
Note: If Mute is activated, the speaker mode is deactivated.
Headset: c onnects to a Bluetooth headset.
n
Tap Headset during a call to activate a Bluetooth headset. A green line will appear under the
l
Headset button.
Phone Calls
Phone.
.
33