Quick Reference Guide - Sharp FO-DC635U Service Manual

12. Quick reference guide

12.1. SENDING FAXES
Place your document (up to 50 letter-size pages) face down in the doc-
ument feeder.
(Note: For Normal Dialing and Direct Keypad Dialing, you can also
load the document after dialing the number.)
RESOLUTION CONTRAST
Press or
12.1.1 Normal Dialing
1) Lift extension phone or press
2) Dial the fax number (if using an extension phone, dial on the exten-
sion phone keypad).
3) Wait for the reception tone (if a person answers, ask them to press
their Start key).
START/
4) Press .
ENTER
12.1.2 Rapid Key Dialing
1) Press the desired Rapid Key.
12.1.3 Speed Dialing
SPEED DIAL
1) Press and enter the desired Speed Dial number (press
START/
if you entered a 3-digits number).
ENTER
START/
2) Press .
ENTER
12.1.4 Direct Keypad Dialing
1) Dial the fax number.
START/
2) Press .
ENTER
12.2. STORING AUTO DIAL NUMBERS
MENU
1) Press and then
selected in the display.
START/
2) Press . Make sure that DESTINATION SETTING is
ENTER
selected.
START/
3) Press . Make sure that SET is selected. (To clear a num-
ENTER
ber, select CLEAR.)
START/
4) Press .
ENTER
5) To store a Rapid Key number, press the desired Rapid Key.
if needed.
SPEAKER
.
or until ENTRY MODE is
To store a Speed Dial number, press
from 1 to 200 (press
(If clearing a number, select it as explained above and then press
STOP
START/
and
ENTER
6) If the network scanner option is installed, SELECT DESTINATION
TYPE will appear. Make sure that FAX is selected and press
START/
ENTER .
7) Enter the full fax number and press
8) Enter a name by pressing the letter keys and press
9) Select YES if this is a Chain Dial number or NO if not, and press
START/
.
ENTER
10)If the dual-line option is installed, select LINE-1, LINE-2, or AUTO
START/
and press .
ENTER
STOP
11)Press repeatedly to exit.
1 – 16
FO-DC635U
SPEED DIAL
and enter a number
START/
if you entered a 3-digits).
ENTER
.)
START/
.
ENTER
START/
.
ENTER