SignaMax 500-7624FE2GC User Manual
  1. Manuals
  2. Brands
  3. SignaMax Manuals
  4. Network Router
  5. 500-7624FE2GC
  6. User manual

SignaMax 500-7624FE2GC User Manual

24 ports 10/100base-t management ethernet switch with 2 1000base-x combo sfp slots uplink
Hide thumbs
Table of Contents

Advertisement

Quick Links

24 PORTS 10/100BASE-T MANAGEMENT
ETHERNET SWITCH WITH 2 1000BASE-X
COMBO SFP SLOTS UPLINK
:
500-7624FE2GC
Model
SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 500-7624FE2GC and is the answer not in the manual?

Questions and answers

Related Manuals for SignaMax 500-7624FE2GC

Summary of Contents for SignaMax 500-7624FE2GC

  • Page 1 24 PORTS 10/100BASE-T MANAGEMENT ETHERNET SWITCH WITH 2 1000BASE-X COMBO SFP SLOTS UPLINK 500-7624FE2GC Model SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 2: Copyright Statement

    No part of this document can be copied or reproduced in any form without written consent from the company. Trademarks: All trade names and trademarks are the properties of their respective companies. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 3: Table Of Contents

    2.6.11 Remarking command mode ................55 2.6.12 STP command mode ..................56 2.6.13 Security command mode ................... 59 2.6.14 Switch command mode ..................63 SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 4 4.3.12 MVR Configuration ..................102 4.3.12.1 MVR Settings .................... 104 4.3.12.2 MVR Group ....................105 4.3.13 Security Configuration ..................105 SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 5 APPENDIX A: Set Up DHCP Auto-Provisioning ............134 APPENDIX B: DHCP Text Sample .................. 139 APPENDIX C: Firmware Upgrade via TFTP ..............141 SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 6: Introduction

    Managed Switch’s performance for your personalized networking environment. 1.1 Switch Front and Rear Panel 500-7624FE2GC Front Panel: 24-PORT 10/100Mbps Rear Panel: 2 UPLINK COMBO PORTS SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 7: Management Software & Interfaces

    It is very important that the proper cables with the correct pin arrangement are used when connecting the Managed Switch to other switches, hubs, workstations, etc. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 8 PC. By connecting this DB-9 port, it allows you to configure and check the status of Managed Switch even when the network is down or disconnected. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 9: Led Definitions

    The port link speed is in 1000Mbps. Fiber 25 & 26 Orange blinking The LED blinks when traffic is present. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 10 SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 11: Command Line Inteface (Cli)

    • Flow Control None • Enable Terminal keys Step 4: Press Enter to access the CLI (Command Line Interface) mode. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 12: Remote Console Management - Telnet

    Enable mode enter the enable SWH# exit command From the enable Configuration mode mode, enter the SWH(config)# exit config command SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 13: Mode And Command Summary

    While in User SWH# Enter Enable mode. Enter mode, enter the Enable enable command mode and a password (press Enter). SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 14 While in Enable SWH(ip)# Configure IP mode, enter the ip addresses of the command. Managed Switch. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 15 Enter configure Switch’s advanced Configuration command. features, such as mode VLAN, Rate limit, QoS, etc. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 16 DSCP mappings. remarking qos command. When in Config SWH(config- Set up each port’s mode, enter the stp)# STP status. stp command. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 17: Quick Keys

    Ctrl + P Display history commands. Ctrl + U Clear all characters. Ctrl + W Clear characters before the cursor. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 18: General Commands

    Company Name: This shows the company name or related information. System Object ID: This shows the predefined System OID. System Contact: This shows the system contact information. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 19 For example, if you type “show qos” in Enable mode (SWH#), then the current setting of qos command will be displayed. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 20 ?. For example, if you type “show dot1x ?” in User, Enable, Configuration mode, then sub-commands within Dot1x will be displayed as shown below. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 21 For example, when you are in SWH(console)# and have changed the setting of time-out function, you can type “show” after “SWH(console)#” then you can view the currently-configured setting of time-out function. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 22: Listing Command

    When entering a command without the required parameter, the system will remind users of the correct command’s syntax and parameter. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 23: Press Spacebar To Continue

    Several options, separated by a vertical bar, are read_only | access_denied> available for selection. Select one option within the angle bracket. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 24: Login Username & Password

    Managed Switch for use when you gain access again to the device (See Backup command mode for detailed descriptions). SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 25: User Mode

    When you successfully enter Enable mode, the prompt will be changed to “SWH#”. Press ? to view a list of commands available for use. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 26: Backup Command Mode

    <file directory>: Enter the file location within the FTP or TFTP server. exit Exit the current mode and return to Enable Mode. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 27: Console Command Mode

    DHCP server, please refer to APPENDIX address <ip> <mask> <gw> Enter the IP address, subnet mask and gateway of SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 28: Ping Command Mode

    [-r repeat (1-99)times]: Enter the number of times that ping packets are sent (optional). For example: SWH# ping 127.0.0.1 –s 50 –r 5 SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 29: Restore Command Mode

    SWH(service-snmp)# mode enable exit Quit the SNMP service mode and return to the service mode. show Show SNMP service information. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 30 Firmware. Read Only: Allow to retrieve information only. Access Denied: Access to the Managed Switch SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 31 To delete a registered trap destination. SWH(snmp-trap-dest)# delete 1 exit Quit the Trap Destination mode and return to SNMP service mode. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 32: System Command Mode

    Specify a company name of up to 55 alphanumeric characters. syscontact <system_contact> Enter contact information for this Managed Switch of up to 55 alphanumeric characters. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 33: Time-Server Command Mode

    SWH(time-server)# syninterval 2 time-zone <time_zone> Specify the appropriate time zone from the list. To view the list, type in time-zone after SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 34: Upgrade Command Mode

    <filelocation>: Enter the file location within the FTP or TFTP server. exit Quit the current mode and return to Enable Mode. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 35: User Command Mode

    Mode. show Show currently-registered usernames. SWH(user_userna state <enable | disable> To enable or disable this new login user me)# account. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 36 If you want to edit settings of the user account “mis2”, you can use the following commands to enter the editing mode. SWH#user mis2 SWH(user_mis2)# SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 37: Configuration Mode

    Set up the max-frame size. show Show a list of commands or show the current setting of each listed command. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 38: Acl Command Mode

    SWH(config)#. For example, enter SWH(config)# acl 100 to modify the details of ACL 100 rule. in-port <any | 1-26> Set up which port is the ingress port. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 39 VLAN. For example: SWH(config-acl_100)# vid 200 ipv4 <any | enable | disable> To enable or disable IPv4 traffic to pass SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 40 0 and 1048575. For example: SWH(config_acl-100)# ipv6 enable SWH(config_acl-100)# flowlabel any SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 41 Mirroring configurations. Please refer to Mirror Command Mode for further explanations. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 42 If you want to use “redirect”, you have specify the redirect port by issuing redir-port command. For example: SWH(config_acl-100)# action redirect SWH(config_acl-100)# redir-port 24 SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 43: Dot.1X Command Mode

    <port_list> <type> authentic Reset Authenticate authentic <port_list> exit Exit from current mode exit show Show Dot1x Settings show SWH(config-dot1x)# SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 44 <eapol_timeout>: 10~255 seconds exit Quit the current mode and return to SWH (config-dot1x)#. show Show or verify current dot.1X configurations. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 45: Igmp Command Mode

    <port_list>: Specify a port number or multiple port numbers with the format 5, 7, 8, 9, 12 or 5, 7-9, 12. For example: SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 46: Igmp Filter Command Mode

    Set Filter Maping filter <port_list> <profile>. exit Exit from current mode exit show Show IGMP Filter Settings show SWH(config-igmpfilter)# SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 47 (The field for segment ID is from the entry registered in Segment option.) SWH(config- mode <enable | disable> To enable or disable IGMP filtering function. If SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 48: Mac Command Mode

    Command & Parameter Description SWH(config-mac- add <mac-addr> <vlan_id> <port | To forward or filter packets from a MAC static)# filter> address. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 49: Mirror Command Mode

    To enable or disable Target Port’s mirroring mirror)# on Source ports. Both ingress (incoming) and egress (outgoing) traffic will be copied to the target port. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 50: Mvr Command Mode

    Refer to IGMP command mode section for detailed explanations on setting up router ports. <server_ip>: Specify the media server IP SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 51 SWH(config-mvr-group)# delete 4094 224.0.1.0 238.255.255.255 exit Quit the current mode and return to MVR configuration mode. show Show MRV group configurations. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 52: Multicast Command Mode

    For example: SWH(config-multicast)# delete 224.0.1.0 4094 exit Quit the current mode and return to Configuration mode. show Show current multicast settings. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 53: Port Command Mode

    Duplex mode (full or half duplex) of the port(s). Flow Control: Enable or disable the flow control. For example: SWH(config)# port all state enable SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 54: Qos Command Mode

    5, 7, 8, 9, 12 or 5, 7-9, 12. <weight>: Specify the weight from 1~8 for the SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 55 SWH(config-qos-rate-limit)# egress 3-6,15,20 2500 SWH(config-qos)# exit Quit the current mode and return to the Configuration mode. show Show current QoS settings. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 56: Remarking Command Mode

    <802.1p>: 0~7 For example: SWH(config-remarking-q-mapping)# 802.1p 1- 3,7 7 SWH(config- exit Quit the current mode and return to remarking)# Configuration mode. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 57: Stp Command Mode

    Bridged Local Area Network. The default hello time is 2 seconds SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 58 <port_list>: Specify a port number or multiple port numbers with the format 5, 7, 8, 9, 12 or SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 59 SWH(config-stp)# p2p 1-4,10-15,18,19 enable exit Quit the current mode and return to Configuration mode. show Show or verify currently-configured Rapid Spanning Tree settings. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 60: Security Command Mode

    5, 7, 8, 9, 12 or 5, 7-9, 12 For example: SWH(config-security-opt82)# trust-port 1- SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 61 <mask>: Specify a subnet mask. <vlan_ip>: 1~4094 <port>: 1~24 delete <ip> <mask> <vlan_ip> Delete a static IP. <port> <ip>: Specify a static IP address. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 62 <port>: 1~24 exit Quit the current mode and return to Security Configuration mode. show Show or verify currently-configured Static-IP settings. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 63 4, 10-15, 18, 19 20 state <port_list> <enable | disable> To enable or disable each port state. <port_list>: Specify a port number or multiple SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 64: Switch Command Mode

    For example: SWH(config-switch)# max-frame 3 exit Quit the current mode and return to the Configuration mode. show Show current Switch settings. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 65: Vlan Command Mode

    VLAN rule of up to 15 characters. For example: SWH(config-vlan-port-base)# add 2, cpu myvlan delete <name> or <index> Delete a registered port-based VLAN. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 66 [name]: Entering a name or description up to 15 characters for this service VLAN. For example: SWH(config-vlan-service)# add 2 3-8 myservlan SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 67 Quit the current mode and return to VLAN mode. show Show or verify currently-added or deleted protocol VLAN settings. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 68 To specify whether egress traffic is normal un_modify> or unmodified. <port_list>: Specify a port number or multiple port numbers with the format 5, 7, SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 69 SWH(config-vlan)# egress 1-4,10-15,18,19 un_modify exit Quit the current mode and return to Configuration mode. show Show or verify VLAN configurations. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 70: Snmp Network Management

    The file name extension is .mib, which SNMP based compiler can read. Please refer to the appropriate documentation for instructions on installing the system private MIB. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 71: Web Management

    After a successful login, the Main Menu screen shows up. The rest of the menu functions in the Web Management are similar to those described at the Console Management and are also described below. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 72: Information

    2. User Authentication: Add or remove a user account or view a list of registered accounts. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 73: System Information

    Local Time: View-only field that show the local time of this Managed Switch. Up Time: View-only field that shows how long the system has been turned on. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 74: User Authentication

    When you enter information for this new username account, simply click the “Insert” button to add it to the User Accounts list below. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 75: Network Management

    Trap Configuration: View the Managed Switch trap configuration. Enable or disable a specific trap. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 76: Network Configuration

    Current State: This View-only field shows manually or DHCP assigned IP address, Subnet Mask and Gateway of the Managed Switch. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 77: System Service

    SNMP Service: To enable or Disable the SNMP Management service. Web Service: To enable or Disable the Web Management service. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 78: Time Server Configuration

    LAN with the Managed Switch or at least not too far away. In this way, the time will be more accurate. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 79: Device Community

    Managed Switch will respond nothing. For example, if a community only has Read & Write privilege, then it cannot browse the Managed Switch’s user table. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 80: Trap Destination

    Port Link: Enable or disable the Managed Switch to send port link up or link down trap. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 81: Switch Management

    13. Security Configuration: Set up DHCP option 82 agent relay, port setting, filtering and static IP table configuration. 14. Access Control List Management: Set up access control entries and lists. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 82: Switch Configuration

    Port State: Enable or disable the current port state. Port Type: Select Auto-Negotiation or Manual mode as the port type. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 83: Port Mirroring

    4.3.4 DSCP Remark Select the option DSCP Remark from the Switch Management menu and then the following screen page appears. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 84: Static Multicast Configuration

    VID, it will be forwarded to the selected forwarding port directly. Click the “Insert” button to add this rule to the Static Multicast Table. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 85: Rapid Spanning Tree

    1. RSTP Switch Settings: Set up system priority, max Age, hello time, etc. 2. RSTP Physical Port Settings: Set up physical, ability and edge status of port. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 86: Rstp Switch Settings

    The fields for “Edge” and “Point to point” become selectable in RSTP Physical Port Settings when you select RSTP. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 87: Rstp Physical Port Settings

    The fields for “Edge” and “Point to point” become selectable in RSTP Physical Port Settings when you select RSTP. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 88: Configuration

    2. 802.1X Port Admin State: Enable or disable each port’s 802.1X port state. 3. 802.1X Port Reauthenticate: Set up which ports should reauthenticate with the server. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 89: System

    Reauth Type: Set up the reauthentication type. Specify “manual” to allow clients to re- authenticate with the RADIUS server manually. Specify “auto” to enable clients to re- authenticate with the RADIUS server automatically. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 90: Port Admin State

    Select the option Static MAC Table Configuration from the MAC Address Management menu and then the following screen page appears. MAC Address: Specify a destination MAC address of incoming packets. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 91: Vlan Configuration

    SVID and server port. 802.1q Tag VLAN Member: Set up 802.1q VLAN table. 802.1q Service VLAN Member: Configure which port(s) are service ports. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 92: Tag Vlan

    VLAN 100. Therefore, traffic from Port 21 will be forwarded to other member ports; these are Port 22, 23, 24. Port 21 is a member in VLAN 100: SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 93 PVID: The range of Port VLAN ID is between 1 and 4094. PVID will be assigned to untagged frames received on the interface. The default setting is 1. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 94: Tag Vlan Member

    4.3.9.3 802.1q Service VLAN Member Select the option 802.1q Service VLAN from the VLAN Configuration menu and then the following screen page appears. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 95: Protocol Vlan

    4.3.9.5 Management VLAN Select the option Management VLAN from the VLAN Configuration menu and then the following screen page appears. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 96: Port-Based Vlan

    Port-based Member Port: Tick the checkboxes on ports that you would like them to belong to this Port-based VLAN rule. 4.3.10 QoS Priority SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 97: Qos Port Configuration

    Select the option QoS Port Configuration from the QoS Priority menu and then the following screen page appears. Port No.: This field will show the port number that you would like to edit. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 98: Qos Mapping Configuration

    4.3.10.3 Rate Limiters Select the option Rate Limiters from the QoS Priority menu and then the following screen page appears. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 99: Igmp Snooping

    (or operating system) will not receive and filter all the multicast traffic generated in the network. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 100: Igmp Configuration

    IGMP Leave message on that interface. When disabled, the system will wait for a period of time (Max Response time) SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 101: Igmp Vlan Id

    IP Range: Specify the multicast IP range. The available IP range is from 224.0.1.0~ 238.255.255.255 Click “Insert” to add this rule in the IPMC segment table below. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 102: Ipmc Profile

    Segment: Enter the existing segment IDs for this profile. Click “Insert” to add this rule in the IPMC profile table below. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 103: Igmp Filtering

    MVR Configuration Guidelines and Limitations Guidelines: Enable IGMP global setting. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 104 MVR Settings: To enable or disable MRV global settings and create MVR VLAN to indicate the Source and Receive port. MVR Group: Create MVR Groups whose multicasting stream would belong to MVR VLAN. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 105: Mvr Settings

    --: Not included in this MVR VLAN rule. Receive port: Switch ports that receive multicast data can be selected as receiver ports. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 106: Mvr Group

    Enable DHCP Option 82 Relay Agent global setting. Create Option 82 and trust port setting. Create Static IP table for authorized IP address. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 107: Dhcp Opt82 Settings

    4.3.13.1 DHCP Opt82 Settings Select the option DHCP Opt82 Settings from the Security Configuration menu and then the following screen page appears. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 108: Dhcp Port Settings

    4.3.13.2 DHCP Port Settings Select the option DHCP Port Settings from the Security Configuration menu and then the following screen page appears. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 109: Filter Configuration

    Port Isolation: Enable or disable port isolation function. If port isolation is set to enable, the customer port (port 1~24) can’t communicate to each other. IPv6 Filter: Enable or disable IPv6 filter. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 110 UPnP Filter: Enable or disable UPnP filter. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 111: Configuring Dhcp Snooping

    Managed Switch again to enable them to initiate conversations with DHCP server. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 112: Static Ip Table Configuration

    Unkown Multicast: To set up each port’s unknown multicast packet rate. Allowable multicast packet rate for port 1through 24 is 0~148810 and for port 25~26 (25~28) is 0~1048575. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 113: Anti-Broadcast Control

    ACL Rate Limiter Configuration: Set up rate limiting configurations. ACL Configuration: Set up access control list rules. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 114: Acl Rate Limiter Configuration

    Click the “Apply ACL Rule” button to make your rules effective immediately. ACL Rule Table ACL ID: View-only field that shows the ACL ID for this entry. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 115 Click the “Delete” button to remove the entry from the ACL Rule Table. Rule ID: Specify an ACL ID (1~300) for this rule. Each ID can only be used once. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 116 Disable: IP does not have to be version 4. IPv6: To enable or disable IPv6 traffic to pass through. Any: Any IP versions will apply. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 117 Ratelimit: Select “Ratelimit” to apply rate limiting settings. When this is used, you need to set up which rate-limiting ID that you would like to use in “Rate Limit” field below. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 118 New Queue: Specify a new customer priority queue (0~7) to replace an old one for egress traffic. The priority queue setting can be changed in DSCP Remark. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 119: Switch Monitor

    Vendor S/N, etc. SFP port state shows current DMI (Diagnostic monitoring interface) temperature, voltage, TX Bias. 9. 802.1X Monitor: View port status and statistics. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 120: Switch Port State

    Full or Half. Flow Control: View-only field that shows the current state of Flow Control function, either enabled or disabled. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 121: Anti-Broadcast Status

    Time Left: View-only field that shows how much lease time left before the client is asked to re-authenticate with the server. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 122: Mac Address Table

    Port Packet Error Statistics: View each port’s traffic condition of error packets, e.g. CRC, fragment, Jabber, etc. Port Packet Analysis Statistics: View each port’s traffic condition of error packets, e.g. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 123: Port Traffic Statistics

    Select Port Packet Error Statistics from the Port Counters menu and then the following screen page appears. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 124 TX CRC/Alignment: View-only field that show CRC/Alignment error frames sent. Total Errors: View-only field that show the total errors occurred. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 125: Port Packet Analysis Statistics

    TX Unicast Frames: View-only field that show how many good unicast frames sent. TX Multicast Frames: View-only field that show how many good multicast frames sent. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 126: Rstp Monitor

    In this page, you can find the following information in a RSTP VLAN bridge: Bridge Mode: View-only field that shows the mode of this Managed Switch either in Root, Designated, or Blocked mode. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 127: Rstp Port Status

    Role: View-only field that shows the Role of the port (Root, Designated or Blocked). Port State: View-only field that shows the state of the port (Forward or Discard). SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 128: Igmp Monitor

    Querier: The state of IGMP querier in the VLAN. RX Queries: The total received IGMP general queries from IGMP querier. RX v1 Reports: IGMP Version 1 reports received. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 129: Igmp Group Table

    SFP Port Info: This shows SFP information including its speed, transmitting distance, and vendor-specific information. SFP Port State: This shows SFP’s temperature, Voltage, TX Bias, etc. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 130: Sfp Port Info

    TX Bias (mA): View-only field that shows the slide-in SFP module operation current. TX Power (dbm): View-only field that shows the Slide-in SFP module optical Transmission power. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 131: Monitor

    Upgrade: Perform Firmware upgrade. Back / Restore: Backup the configuration files or restore the Managed Switch back to the previous configurations. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 132: Upgrade

    Click the “Reset” button to clear your configurations. 4.5.2 Backup / Restore Select Back / Restore from the System Utility menu and the following screen page appears. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 133 Users can use CLI, Web Management or simply press the “Reset” button located on the front panel to restore the device back to the initial state. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 134: Factory Default

    Click the “Reset” button to restart the Managed Switch. Please note that all unsaved configurations will be cleared from the system. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 135: Appendix A: Set Up Dhcp Auto-Provisioning

    DHCP client. The system includes ISC DHCP server, File server (TFTP or FTP) and the Managed Switch. TFTP/FTP Server ISC DHCP Server The Managed Switch The Managed Switch Typology Example SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 136 A sample of dhcp text is provided in APPENDIX B. Please copy the marked area to “dhcpd.conf” file. Copy the text to dhcpd.conf file Sample dhcp text SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 137 11. Specify the MD5 for configuration image. The format of MD5 might be the same as the one in the sample text. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 138 The TFTP/FTP File server should include the following items: Firmware image Configuration image User account for your device (For FTP server only) SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 139 The device will retry for 3 times if the file is incorrect, then it gives up until getting another DHCP ACK packet again. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 140: Appendix B: Dhcp Text Sample

    CTS.server-login-name "anonymous"; option CTS.server-login-name "sqa"; option CTS.server-login-password "a12345A"; subclass "vendor-classes" "500-7624FE2GC " { vendor-option-space CTS; option CTS.firmware-file-name "500-7624FE2GC_FW_1.02.1A_101203.bin "; SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 141 CTS.firmware-md5 d8:e2:f0:de:7d:a5:8e:2c:6e:4e:a7:5a:39:78:07:d8; option CTS.configuration-file-name "metafile"; option CTS.configuration-md5 95:d6:5c:39:4d:83:76:30:61:16:9b:de:37:ba:12:84; option CTS.option 1; SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

  • Page 142: Appendix C: Firmware Upgrade Via Tftp

    Firmware you have to provide your own TFTP server IP address. Figure2. Change the base directory and Provide TFTP Server IP address SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 143 Managed Switch. When Firmware upgrading is complete, the Managed Switch will be rebooted to run the new Firmware. Please do not turn off power during reboot process. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...
  • Page 144 This page is intentionally left blank. SIGNAMAX a.s. Office: Vlarska 22, 627 00 Brno, CZ T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu...

Table of Contents