Parts Name And Functions; Control Panel - NEC MultiSync LCD4010 User Manual

Parts Name and Functions

EXIT
8 7
POWER button ( )
1
Switches the power on/off. See page 18.
MUTE button
2 AV
Switches the audio mute ON/OFF.
INPUT button
3
Acts as SET button within the OSM menu.
Selects which signal connected to the display is shown. (Toggle
switches between [RGB1], [RGB2], [RGB3], [DVD/HD], or
[VIDEO].)
[DVD/HD] and [VIDEO] inputs are enabled when the AV-unit
AV
option is installed.
PLUS button
(+)
4
Acts as (+) button to increase the adjustment with OSM menu.
Increases the audio output level when the OSM menu is turned
AV
off.
MINUS button
(-)
5
Acts as (-) button to decrease the adjustment with OSM menu.
Decreases the audio output level when the OSM menu is turned
AV
off.
UP ( ) button
6
Activates the OSM menu when the OSM menu is turned-off.
Acts as button to move the highlighted area up to select the
adjustment with OSM menu.
Denotes an AV unit function.
AV
All AV functions are enabled when the AV unit is installed.

Control Panel

INPUT
5
6 4 3
English-6
EXIT INPUT MUTE
10
OFF
MUTE
2 1
DOWN ( ) button
7
Activates the OSM menu when the OSM menu is turned-off.
Acts as button to move the highlighted area down to select the
adjustment with OSM menu.
8
EXIT button
Activates the OSM menu when the OSM menu is turned-off.
Acts as EXIT button to move to previous menu in the OSM menu.
Remote control sensor and Power indicator
9
Receives the signal from the remote control (when using the
wireless remote control). See page 9.
Glows green when the LCD monitor is in active mode and glows
red when the LCD is in POWER OFF mode. When the LCD is in
power save mode, it will glow both green and red. When
SCHEDULE is enabled, it will blink green. See page 19.
When a component failure is detected within the monitor, it will
blink red.
Main Power Switch
10
Seesaw Switch for the main power on/off.
Control Key Lock Mode
This control completely locks out access to all Control Key
functions.
To activate the control key lock function, press both "
" " simultaneously and hold down for three (3) seconds.
To go back to user mode, press both "
neously and hold for three (3) seconds.
9
ON
Button Location
" and
" and " " simulta-