LG PA1000 Owner's Manual page 7

CAUTION
Do not place heavy objects on the
y
projector.
- It may fall down and cause personal
injury.
Be careful not to allow any impact to
y
the lens during transport.
Do not touch the lens of the projector.
y
- The lens may be damaged.
Do not use any sharp tools on the
y
projector such as a knife or hammer,
because this may damage the casing.
In the event that no image appears
y
on the screen or no sound is heard,
stop using the projector. Switch off the
projector, unplug it from the power out-
let and contact our service center.
- This may result in fire or electric shock.
Do not drop anything onto
y
the projector or allow anything to
bang into the projector.
- This may cause damage to the projector
or personal injury.
It is recommended that you maintain
y
a distance of more than 5 - 7 times
the diagonal length of the screen.
- If you watch the screen at a close
distance for a long time, your eye
sight may become worse.
Do not block the light beam emitted
y
from the projector using a book or
other object.
- Lengthy exposure to the projector
beam may result in fire. In addition, the
lens may be overheated and damaged
by the reflected heat.
Do not start the projector with the
y
volume turned up high.
- High volume may damage hearing.
SAFETY INSTRUCTIONS
Cleaning
WARNING
Do not spray the projector with
y
water when cleaning. Make sure water
does not flow into the projector.
- This may result in fire or electric
shock.
When there is smoke or a strange
y
smell coming out from the projector or
a foreign object falls into the pro jector,
switch it off and unplug it from the
power outlet and contact our service
center.
- Otherwise, this may result in fire or
electric shock.
Use air spray, a soft cloth or
y
a cotton swab moistened with a
lens cleaning chemical or alcohol to
remove dust or stains on the front
projection lens.
CAUTION
Contact your seller or our service
y
center once a year to clean the inter-
nal parts of the projector.
- If you do not clean the projector for
a long period of time, dust will
accumulate, which may result in fire
or damage to the projector.
When cleaning plastic parts such as
y
the projector case, unplug the power
first and wipe with a soft cloth. Do not
spray with water or wipe with a wet
cloth. Never use glass cleaner, auto-
mobile or industrial shiner, abrasives,
wax, benzene, or alcohol as these
can damage the projector.
- This can result in fire, electric
shock or cause damage to the product
(deformation and corrosion).
7