Installation; Installation Precautions - LG PA1000 Owner's Manual

16
PREPARATION

Installation

Installation Precautions

Place the projector in a well-ventilated
y
environment.
- To prevent internal heat build-up,
install the projector in a well-
ventilated place.
Do not place anything near the
projector as this may block its air
vents. If the air vents are blocked,
the internal temperature will
increase.
- Do not place the projector on a
carpet or rug. If the vent is on the
bottom, use the projector on a solid
level surface and ensure the vent is
not blocked.
- Be sure to prevent foreign objects
such as paper debris from entering
the projector.
- Leave enough distance (30 cm or
more) around the projector.
Do not place the projector in a hot
y
or humid environment.
- Do not place the projector in a hot,
cold, or humid environment.
Do not place the projector in a place
y
where it will easily attract dust.
- This may result in fire.
Never open any cover on the
y
projector. There is a high risk of
electric shock.
The projector is manufactured using
y
high-precision technology. You may,
however, see tiny black dots and/
or bright colored dots (red, blue or
green) that continuously appear on
the projector screen. This is a normal
result of the manufacturing process
and does not indicate a malfunction.
The remote control may not work
y
in an environment where a lamp
equipped with electronic ballasts or
a three-wavelength fluorescent lamp
is installed. Replace the lamp with an
international standard lamp for the
remote control to work normally.