Related Manuals for LG PF80A
Summary of Contents for LG PF80A
- Page 1 Owner's Manual LED 1000 HD Digital Art Projector Please read the safety information carefully before using the product. PF80A...
-
Page 2: License
LICENSE LICENSE Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ® ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified ®... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Please take note of the safety instructions to prevent any potential accident or misuse of the projector. Safety precautions are given in two forms, i.e. Warning and Caution as detailed below. WARNING: Failure to follow the instructions may cause serious injury and even death. CAUTION: Failure to follow the instructions may cause injury to persons or damage to the product. - Page 4 SAFETY INSTRUCTIONS Read these instructions. Do not place the projector where it Keep these instructions. might be exposed to dust. Heed all warnings. - This may result in fire. Follow all instructions. Do not use the projector in a damp place such as a bathroom where it is Indoor Installation likely to get wet.
- Page 5 SAFETY INSTRUCTIONS Be careful not to tip the projector over CAUTION when connecting external devices to Hold the plug firmly when unplugging. the projector. - A damaged wire may create a fire - This may cause personal injury or hazard. damage to the projector.
- Page 6 SAFETY INSTRUCTIONS When in Use When the lamp is on or has just been turned off, avoid touching the air vent or lamp, because these will be very hot. WARNING If there is a gas leak in the room with Do not place anything containing the projector, do not touch the projector liquid on top of the projector such as...
- Page 7 SAFETY INSTRUCTIONS Cleaning CAUTION Do not place heavy objects on the WARNING projector. - It may fall down and cause personal Do not spray the projector with water when cleaning. Make sure water injury. Be careful not to allow any impact to does not flow into the projector.
- Page 8 SAFETY INSTRUCTIONS Remove the plug from the outlet Do not touch the lens; doing so can before cleaning the product. result in burns or damage to lens. - Otherwise, this may result in electric Lens and unit may be HOT during shock.
- Page 9 SAFETY INSTRUCTIONS Dispose of used batteries properly. Risk Group 2 - This may result in explosion or fire. The correct method of disposal may vary CAUTION: Hazardous optical depending on your country or region. radiation may be emitted from this Dispose of the battery pack product.
- Page 10 SAFETY INSTRUCTIONS FCC NOTICE This device complies with Part 15 of the FCC Rules. Operation is subject to the Federal Communications following two conditions: Commission (FCC) Statement 1) This device may not cause harmful You are cautioned that changes or interference, and modifications not expressly approved 2) This device must accept any...
- Page 11 SAFETY INSTRUCTIONS IC (CANADA) Avis d’Industrie Canada sur l’exposition aux rayonnements Industry Canada Statement: Cet appareil est conforme aux limites This device complies with RSS-210 of d’exposition aux rayonnements the Industry Canada Rules. Operation is d’Industrie Canada pour un subject to the following two conditions: environnement non contrôlé.
-
Page 12: Table Of Contents
CONTENTS CONTENTS LICENSE ENTERTAINMENT To connect network SAFETY INSTRUCTIONS - One-click network connection - To connect to a network through Set Expert PREPARATION - To Use the Wi-Fi Direct Function Accessories - To Use the Miracast™/Intel’s WiDi Optional Extras Function - Tips for Network Settings Parts and Components - Front... - Page 13 CONTENTS SOUND Settings TIME Settings OPTION Settings NETWORK Settings SUPPORT CONNECTING DEVICES Connecting to HD Receiver, DVD, VCR, or External Devices - HDMI Connection - HDMI to DVI Connection - AV Connection - Component Connection Connecting to Headphones Connecting a Digital Amp Connecting to PC and Laptop - HDMI Connection Using the Mirroring Function of a Mobile...
-
Page 14: Preparation
PREPARATION PREPARATION Accessories Accessories included with the project are show below. The pictures may differ slightly from the actual product. Accessories are subject to change without prior notice. New accessories may be added or old ones removed. Remote Control Owner's Manual Power Cord Two AAA Batteries Composite Gender... -
Page 15: Optional Extras
To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you purchased the product. Optional accessories are subject to change without prior notice. Projection Screen Tripod HDMI Cable Video Cable Audio Cable MHL Cable Optical Cable LG Audio Device... -
Page 16: Parts And Components
PREPARATION Parts and Components The projector is manufactured using high-precision technology. You may, however, see tiny black dots and/or bright colored dots (red, blue or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction. -
Page 17: Back
PREPARATION Back (Headphone Port) USB IN 1 Port OPTICAL DIGITAL AUDIO OUT Port USB IN 2 Port LAN Port HDMI IN 1 (ARC) Port COMPONENT IN Port HDMI IN 2 (MHL) Port AV IN Port AC IN Port... -
Page 18: Installation
PREPARATION Installation Installation Precautions Do not place the projector in a hot Place the projector in a well-ventilated or humid environment. environment. - Do not place the projector in a hot, - To prevent internal heat build-up, cold, or humid environment. install the projector in a well- Do not place the projector in a place ventilated place. -
Page 19: Projection Distance Per Screen Size
PREPARATION Projection Distance per Screen Size Place the projector on a sturdy, level surface, together with the PC or audio/video source. Place the projector an appropriate distance away from the screen. The distance between the projector and the screen determines the actual size of the image. Position the projector so that the lens is at a right angle to the screen. -
Page 20: How To Install The Projector On A Tripod
PREPARATION How to Install the Projector On a Tripod You can install this projector using a camera tripod. As shown below, you can mount the projector instead of a camera on the tripod. When stabilizing the tripod, we recommend using a locking bolt of standard size 4.5 mm or less. -
Page 21: Remote Control
REMOTE CONTROL REMOTE CONTROL Open the lid at the back of the remote control and insert the batteries as described in the instructions. Use new batteries and do not mix regular or rechargeable batteries. (1.5 V AAA) CAUTION y Do not mix new batteries with old ones. POWER Turns the projector on or off. - Page 22 REMOTE CONTROL SETTINGS Displays or closes the Settings menu. PICTURE Changes the picture mode per press of the button. Q.MENU Allows you to change the settings easily. Up/Down/Left/Right buttons Switches between menu functions. Shows the current mode and saves changes to the settings.
-
Page 23: Using The Projector
USING THE PROJECTOR USING THE PROJECTOR Watching Projector Initial Setup The menu screen display in this owner's manual is an example to help users understand how to operate the product and may look different from the actual screen. Connect the power cord correctly. After waiting for a moment, press the POWER button on the remote control or the control panel. -
Page 24: Focus Of The Screen Image
USING THE PROJECTOR * The initial settings are completed when you select the settings above. Focus of the Screen Image When an image appears on the screen, check if it is in focus and fits the screen properly. To adjust the focus of the image, rotate the focus ring. Focus Ring... -
Page 25: Additional Options
USING THE PROJECTOR Additional Options Using the Keystone Function Adjusting Aspect Ratio To prevent the screen image from becoming trapezoidal, Keystone adjusts Press the SETTINGS button on the remote control. Select PICTURE → the top and bottom width of the image if the projector is not set up at a right Aspect Ratio to change the aspect angle to the screen. -
Page 26: Changing Input Device
USING THE PROJECTOR Changing Input Device To use SIMPLINK SIMPLINK is a feature that enables To select an external input you to control and manage various multimedia devices conveniently using Selects external input. the projector remote control only via the Press the INPUT button on the SIMPLINK menu. - Page 27 USING THE PROJECTOR Explanation on SIMPLINK features NOTE Menu Description This function only works on devices Direct Play Plays the multimedia with the SIMPLINK logo ( device on the projector Verify that the external device has instantly. a SIMPLINK logo. To use the SIMPLINK function, you Select Selects the desired...
-
Page 28: Using The Quick Menu
USING THE PROJECTOR Using the Quick Menu You can customize frequently used menus. Press the Q.MENU button. Press the button to select a menu and press OK. Menu Description Aspect Resizes the picture. Ratio Picture Changes the picture mode. Mode Sound Sets the sound mode. -
Page 29: To Set Sound
USING THE PROJECTOR To Set Sound Press the SETTINGS button on the remote control. Select SOUND → Sound Out → External Speaker (Optical/HDMI ARC) → ARC Mode. To Set Sound Output Menu Description To use projector’s speakers Even when the connected ARC-supported external Sound is output through the projector audio device is turned... - Page 30 USING THE PROJECTOR Press the SETTINGS button on the To connect and use LG audio device remote control. Select SOUND → LG audio device allows you to enjoy rich Sound Out → External Speaker powerful sound easily. (Optical/HDMI ARC) → Digital Wired Connection: Sound Out.
-
Page 31: To Connect And Use A Bluetooth Headset
When a device is fails to connect. Check the device power connected, its name is shown. to connect and if the LG Audio device is If two or more devices are detected, in a proper operating condition. the first detected device is connected If two or more devices are detected, first. -
Page 32: Entertainment
ENTERTAINMENT ENTERTAINMENT To connect to a network through Set Expert To connect network For use in special circumstances such as in offices (in cases where a static IP A wireless or wired network connection is used). is required to use the DLNA function. Press the SETTINGS button on the remote control. -
Page 33: To Use The Wi-Fi Direct Function
ENTERTAINMENT To Use the Wi-Fi Direct Enable the Miracast™/Intel’s WiDi settings on the device that you want Function to connect to. Wi-Fi Direct is a function that allows your A list of devices that can be projector to connect with a Wi-Fi Direct connected to the projector is device without Internet connection. -
Page 34: Tips For Network Settings
ENTERTAINMENT Tips for Network Settings The surrounding wireless environment can cause the wireless network Use a standard LAN cable (Cat5 service to run slowly. or higher with RJ45 connector, 10 If you do not turn off the entire local Base-T or 100 Base TX LAN port). home network, network traffic may Resetting your modem can cause occur on some devices. -
Page 35: Smartshare
SMARTSHARE SMARTSHARE Removing a USB Device Click the Q.MENU button. Before Using Use the button to move to USB Device and press the OK button. Connecting a USB Device Select a USB to remove. Wait for confirmation that the USB device has Connect a USB device (external HDD, stopped before removing the USB. - Page 36 SMARTSHARE Tips for Using a USB Device If the USB storage device has a built- in auto recognition program or uses its own driver, it may not work. Some USB storage devices may not work or may work incorrectly. If you use a USB extension cable, the USB device may not be recognized or may not work properly.
-
Page 37: To Use Smartshare
SMARTSHARE To Use SmartShare™ Press the SETTINGS button on the remote control. Select SMART SHARE. You can watch the photo, music, video and document on the projector by connecting a USB or home network (DLNA). The photo, music, video and document files of all devices connected to the projector are displayed. -
Page 38: Watching The Videos
SMARTSHARE Watching the Videos In the Movie List, you can watch movies stored on the connected USB device. Controls playback and sets options while viewing videos. Playing video - warning Some subtitles created by users may not work properly. The video and subtitle files should be placed in the same folder. For subtitles to display correctly, the video and subtitle files must have the same name. - Page 39 SMARTSHARE To control video playback You can control playback using the following buttons. Option Shows the current playing position. Use the button to move forward or backward. Item Description Resumes normal playback. Pauses the video player. Displays in slow motion. Whenever this button is pressed, the playback speed is increased or decreased by one unit.
-
Page 40: Viewing The Photos
SMARTSHARE Viewing the Photos You can view photos stored on a connected device. To control photo view You can control playback using the following buttons. Option Item Description Selects the previous or next photo. If no picture is selected, all photos in the current folder are displayed in a slide show. -
Page 41: Listening To Music
SMARTSHARE Listening to Music You can play audio files stored on the connected device. To control music playback You can control playback using the following buttons. Changes the playing position. Item Description Plays the previous/next file. ꕙ Pauses the music player. Resumes normal playback. -
Page 42: Viewing Files
SMARTSHARE Viewing Files You can see document files stored on a connected device. Supported File Formats XLS, DOC, PPT, TXT, XLSX, PPTX, DOCX, PDF Microsoft Office 97/2000/2002/2003/2007 version Adobe PDF 1.0/1.1/1.2/1.3/ 1.4 version File Viewer realigns a document, so it may look different from what is displayed on a For documents that include images, the resolution may look lower during the realigning process. -
Page 43: To Set Smartshare™ Related Functions
SMARTSHARE To Set SmartShare™ Related Functions Press the SETTINGS button on the remote control. Select SMART SHARE → Settings. Changes settings related to SmartShare™ content playback. Advanced Setting Item Description My Projector Name Changes the name that appears when searching for the projector from other devices. - Page 44 SMARTSHARE SmartShare™ supporting file Maximum data transfer rate: 20 Mbps(Mega bit per second) External subtitle formats supported: *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX) Internal subtitle formats supported: XSUB (supports internal subtitles generated from DivX6) Subtitle Language Subtitle Language...
- Page 45 SMARTSHARE Video Supported Codec Maximum resolution: 1920 x 1080 @ 30p Extension Codec VC-1 Advanced Profile, VC-1 Simple and Main Profile Video .asf .wmv Audio WMA Standard, WMA 9 Professional DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC, Video Motion Jpeg, MPEG-4 Part 2 .divx .avi MPEG-1 Layer I, II, MPEG-1 Layer III (MP3),...
- Page 46 SMARTSHARE Audio File File type Item Info Bit rate 32 Kbps - 320 Kbps Sample freq. 16 kHz - 48 kHz Support MPEG1, MPEG2, Layer2, Layer3 Available photo file Profile File type Item Minimum: 64 x 64 (jpeg, jpg, JPEG Maximum: Normal Type: 15360 (W) x 8640 (H) jpe) Progressive Type: 1920 (W) x 1440 (H)
-
Page 47: To Connect Dlna
SMARTSHARE To Connect DLNA To connect DLNA DMR (Digital Media Renderer) DLNA stands for Digital Living Network If the PC's operating system is Windows Alliance, which allows you to enjoy 7 or Windows 8 or the DLNA-certified video / music / photo files stored on a device (e.g. -
Page 48: To Connect Dlna Dmp (Digital Media Player)
SMARTSHARE To connect DLNA DMP (Digital Media Player) With a PC having SmartShare™ PC software, music / video / photo files may be replayed on the projector by linking them via home networking. Configure projector and PC on the same network. The projector and each device should be connected through a single access point to enable DLNA service. -
Page 49: Smartshare™ Pc Sw Installing & Setting
You can run the programme when installation is complete. NOTE DLNA or Media Link service is only available if projector and other devices are connected via a single router. PC requirement for installing LG SmartShare™ Recommended Minimum Specifications Item Specifications Intel Pentium Dual Core or Intel Pentium 4 2.0 G or higher/... -
Page 50: In Case Of A Dlna Malfunction
SMARTSHARE In Case of a DLNA If subtitle file is added later, turn off the shared folder and reset. Malfunction DRM file located on a SmartShare PC If the DLNA feature does not work Software server cannot be played. properly, check your network settings. A 5-GHz access point is needed to view 1080p videos via DLNA. -
Page 51: Customizing Settings
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS SETTINGS Press the SETTINGS button. Use the , or button to select the desired item and press the OK button. Use the , or button to set up the desired item and press the OK button. Press the EXIT button when completed. -
Page 52: Picture Settings
CUSTOMIZING SETTINGS PICTURE Settings PICTURE Press the SETTINGS button. Use the , or button to select y ꕊ Energy Saving : Minimum y Picture Mode : Standard PICTURE and press the OK button. y Contrast 100 Use the , or button to set up the y Brightness 50 y Sharpness 20... - Page 53 CUSTOMIZING SETTINGS Item Description Color Adjusts the colours on the screen darker or lighter. Tint Adjusts the red/green colour balance. Advanced Customizes the advanced settings. Control (Expert Control) Picture Sets optional settings. Option Picture Resets values customized by the user. Reset Each picture mode is reset.
- Page 54 CUSTOMIZING SETTINGS Advanced Control Item Description Dynamic Adjusts contrast and colour to the optimal level according to the Contrast screen’s brightness. Dynamic Adjusts colours for more natural-looking colours. Color Skin colour spectrum can be separately set to implement Preferred Skin Color the skin colour as defined by the user.
- Page 55 CUSTOMIZING SETTINGS Item Description White Balance Adjusts white balance. Detailed adjustment is possible as shown below. a. Method: 2 points - Pattern: Inner, Outer - Points: Low, High - Red/Green/Blue: Adjustable range -50 - +50. - Apply to all inputs: The values of the White Balance is applied to all the input modes.
- Page 56 CUSTOMIZING SETTINGS Picture Option Item Description Noise Reduction Reduces screen noise in the video. MPEG Noise Eliminates noise generated while creating digital picture signals. Reduction Black Level Adjusts the brightness or darkness of the screen to suit the black level of the picture input using the degree of darkness (black level) of the screen.
-
Page 57: Sound Settings
CUSTOMIZING SETTINGS SOUND Settings SOUND Press the SETTINGS button. Use the , or button to select SOUND y Smart Sound Mode : Off y Sound Mode : Standard and press the OK button. y Virtual Surround Plus : Off Use the , or button to set up the y Clear Voice II... - Page 58 Return Channel), connect it to the HDMI IN 1(ARC) port. Digital Sound Out: Sets up Digital Sound Output. LG Sound Sound is output through an LG audio device Sync (Optical) connected to the OPTICAL DIGITAL AUDIO OUT port. LG Sound Sync...
- Page 59 Adjusts how the sound is synced to external Speaker speakers, such as an external speaker connected to the digital audio output port, LG audio device, and headphone. The + and - buttons allow the viewer to synchronize the audio with the video.
-
Page 60: Time Settings
CUSTOMIZING SETTINGS TIME Settings TIME Press the SETTINGS button. Use the , or button to select TIME and y Sleep Timer : Off y Auto Off : 60 min. press the OK button. y Automatic Standby : 4 hours Use the , or button to set up the desired item and press the OK button. -
Page 61: Option Settings
CUSTOMIZING SETTINGS OPTION Settings OPTION Press the SETTINGS button. Use the , or button to select y Language OPTION and press the OK button. y Standby Light : On y PJT Mode : Front Use the , or button to set up the y Auto Keystone : On desired item and press the OK button. - Page 62 CUSTOMIZING SETTINGS Item Description Auto Power Makes the projector turn on automatically When the power code is connected to the projector. Item When the power code is connected to the projector, it turns on automatically. When the power code is connected to the projector, it goes into standby mode.
-
Page 63: Network Settings
/ Intel's WiDi Use the , or button to set up the y My Projector Name : PF80A-JE desired item and press the OK button. - To return to the previous menu, press the button. The available network settings are described as follows. -
Page 64: Support
CUSTOMIZING SETTINGS SUPPORT SUPPORT Press the SETTINGS button. Use the , or button to select y Software Update y Product/Service Info. SUPPORT and press the OK button. y Self Diagnosis Use the , or button to set up the desired item and press the OK button. - To return to the previous menu, press the button. -
Page 65: Connecting Devices
CONNECTING DEVICES CONNECTING DEVICES You can connect various external devices to the projector. Computer/Notebook Video/DVD Digital Device LG Audio Device Game Console Headphones Mobile Phone HDMI - page 66 Composite (AV) - page 67 (AV) - page 67 Component - page 68... -
Page 66: Connecting To Hd Receiver, Dvd, Vcr, Or External Devices
CONNECTING DEVICES Connecting to HD NOTE Receiver, DVD, VCR, ARC (Audio Return Channel) or External Devices External audio devices that support SIMPLINK and ARC must Connect an HD receiver, DVD, VCR be connected using HDMI IN 1 player, or External Devices to the (ARC) port. -
Page 67: Hdmi To Dvi Connection
CONNECTING DEVICES HDMI to DVI Connection AV Connection Using an HDMI to DVI cable, connect Connect the output ports of an external the projector's HDMI IN 1 (ARC) port to device and the AV IN ports of the the DVI OUT port. You can also use the projector using an AV cable. -
Page 68: Component Connection
CONNECTING DEVICES Component Connection Connecting to Headphones You can enjoy a video by connecting the Component port of an external device You can listen to the audio through a to the COMPONENT IN port of the headphone. projector. Press the INPUT button on the remote control to select Component. -
Page 69: Connecting A Digital Amp
CONNECTING DEVICES Connecting a Digital NOTE Also, refer to the user manual of the audio device to connect. Using an optical cable, connect the When connecting this product to digital audio input port of a digital amp other devices, make sure to turn to the OPTICAL DIGITAL AUDIO OUT off and unplug all the devices. -
Page 70: Connecting To Pc And Laptop
CONNECTING DEVICES Connecting to PC and The table below shows examples of switching the output. For more Laptop information, refer to the External Output, Connecting to an External The projector supports Plug & Play. Your Monitor, or similar sections of the PC will automatically detect the projector owner's manual of your computer. -
Page 71: Using The Mirroring Function Of A Mobile Phone
CONNECTING DEVICES Using the Mirroring Function of a Mobile Phone MHL Connection The Mobile High-definition Link (MHL) is an interface that can connect a mobile phone to the projector and play video and audio from the mobile phone through the projector. -
Page 72: Maintenance
MAINTENANCE MAINTENANCE Clean your Projector to keep it in optimal condition. Cleaning Cleaning the Lens If there is any dust or staining on the lens surface, you must clean the lens. Use an air spray or a cleaning cloth to clean the lens. To remove dust or stains, use an air spray or apply a small amount of cleaning agent onto a swab or soft cloth to lightly rub the lens. -
Page 73: Information
INFORMATION INFORMATION To Update Projector Software Uses Software Update to check and obtain the latest version. It is also possible to check manually for available updates. Press the SETTINGS button. Select SUPPORT and go to Software Update. Item Description Software Update Set it to On. -
Page 74: Specifications
SPECIFICATIONS SPECIFICATIONS Model PF80A (PF80A-JE) Resolution (Pixel) 1920 (Horizontal) × 1080 (Vertical) Aspect ratio 16:9 (Horizontal:Vertical) Panel size (mm) 16.654 Projection distance 0.63 m - 3.72 m (50.8 cm - 304.8 cm) (Video size) Ratio of upward 100 % projection... - Page 75 SPECIFICATIONS HDMI (DTV) supported mode HDMI (PC) supported mode Horizontal Vertical Horizontal Vertical Resolution Frequency Frequency Resolution Frequency Frequency (kHz) (Hz) (kHz) (Hz) 31.469 59.94 640 x 480 31.469 59.94 720 x 480 31.50 60.00 800 x 600 37.879 60.31 720 x 576 31.25 1024 x 768...
- Page 76 SPECIFICATIONS Component Supported Mode Component Port Connecting Information Horizontal Vertical Resolution Frequency Frequency Component (kHz) (Hz) ports on the 15.73 59.94 Projector 720 x 480i 15.75 60.00 Video output 31.47 59.94 720 x 480p ports on DVD 31.5 player 720 x 576i 15.625 720 x 576p 31.25...
- Page 77 In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.
- Page 78 The model and serial number of the projector are located on the back or on the side of the projector. Record them below should you ever need service. MODEL SERIAL...