22
USING THE PROJECTOR
Focus of the Screen Image
When an image appears on the screen, check if it is in focus and fits the screen
properly.
To adjust the focus of the image, rotate the focus ring.
Watching Projector
1
In standby mode, press the POWER button to turn the projector on.
2
Press the INPUT button and select the input signal you want.
3
Control the projector using the following buttons while watching projector.
Button
VOL -, +
MUTE
Q.MENU
RATIO
Key's ,
4
To turn the projector off, press the POWER button.
Adjusts the volume level.
Mutes all sounds.
Accesses the quick menu. (see page 25)
Resizes an image.
Adjusts Keystone. (see page 23)
Focus Ring
Description