Additional Options; Adjusting Aspect Ratio; Using The Keystone Function - LG PA1000 Owner's Manual

Additional Options

Adjusting Aspect Ratio

Resize an image to view at its optimal
y
size by pressing RATIO while you are
using the projector.
NOTE
Available picture size may differ
y
depending on the input signal.
You can also use the Q.MENU or
y
SETTINGS button.
Menu
16:9 Resizes images to fit the
screen width.
Full Changes to the full screen
regardless of the aspect
ratio.
Just
Displays video images in
Scan the original size without
removing parts of the edge
of the image.
If you select Just Scan,
y
you may see image
noises at the edge or
edges of the screen.
Set By Displays images in the
Program same aspect ratio as the
original image.
4:3
Resizes images to the
previous standard 4:3.
Zoom Resizes the image to fit the
screen width. The top and
bottom parts of the image
may be cut off.
Press the
zoom in or out of the image.
Press the
move the image.
Description
or button to
or button to
USING THE PROJECTOR
Menu
Cinema Formats an image to the
Zoom 1 cinemascope ratio, 2.35:1. It
ranges from 1 to 16.
Press the
zoom in or out of the image.
Press the
move the image.
If you enlarge or reduce
y
an image, the image may
be distorted.
Using the Keystone
Function
To prevent the screen image from
becoming trapezoidal, Keystone adjusts
the top and bottom width of the image
if the projector is not set up at a right
angle to the screen.
Because the Keystone function may
cause inferior screen image quality, use
this function only when it is not possible
to set up the projector at an optimal
angle.
• Keystone 0
◀
1
Press the Key's
button to adjust the picture.
Keystone can be adjusted
y
from -40 to 40.
2
Press the OK button when done.
23
Description
or button to
or button to
▶
- +
OK
or Key's