Using The Lcd Monitor; Self Recording - Panasonic Digital Palmcorder PalmSight PV-DV200-K Operating Instructions Manual

Using the LCD Monitor

The LCD (Liquid Crystal Display) monitor
can be used while recording.
180°
90°
90°
If you adjust the LCD Brightness or
colour.
1 Press MENU to display the main menu
screen.
2 Rotate JOG KEY to select
SETTING from the main menu screen
(pages 23, 25).
3 Press JOG KEY to display the LCD/EVF
SETTING screen.
4 Press JOG KEY to select BRIGHTNESS
or COLOR, then rotate JOG KEY to
adjust them.
5 Press MENU twice to exit this mode.

Self Recording

200_400-K.30-39.p65
LCD-OPEN
Button
LCD/EVF
180°
31
Camera Recording
Before you begin...
• Connect the Palmcorder to a power source
(pages 12, 13).
• Insert a cassette with record tab closed
(page 15).
1
Press LCD-OPEN to unlock the LCD
monitor.
2
Swing the LCD monitor fully open
and adjust the angle.
• The LCD monitor will automatically
turn on.
• When the LCD monitor is completely
closed, it will shut off automatically to
save power.
• Adjust the LCD Brightness and/or
colour of the LCD monitor if
necessary.
3
Start recording (page 30).
Note
• Using the LCD monitor will reduce battery
operating time.
• Close the LCD monitor completely when
not in use.
S E T T I N G
L C D
LCD B R I G H T N E S S
L OW H I G H
LCD COLOR
H I G H
L OW
:
SELECT PUSH JOG KEY
S E T : R OTAT E JOG KEY
E X I T : PUSH MENU KEY
(PV-DV200-K)
Rotate the LCD monitor 180 degrees so
that it faces in the same direction as the
lens, while in the CAMERA mode, to record
yourself.
The picture in the LCD monitor will appear
reversed.
Set SELF-REC to MIRROR (page 23) on
the Camera mode menu screen to see the
picture as it is actually being recorded.
00/06/14, 13:11
/ S E T T I N G
L C D E V F
LCD B R I G H T N E S S
L OW H I G H
LCD COLOR
H I G H
L OW
E V F B R I G H T N E S S
H I G H
L OW
:
SELECT PUSH JOG KEY
S E T :
R OTAT E JOG KEY
E X I T : PUSH MENU KEY
(PV-DV400-K)
31