Notes On Operations - Panasonic Digital Palmcorder PalmSight PV-DV200-K Operating Instructions Manual

Notes On Operations

Cleaning EVF (Electronic Viewfinder)
PV-DV200-K
PV-DV400-K
72
200_400-K.71-78.p65
1
A
Turn the Eyepiece
counterclockwise 1/8 of a turn.
2
Pull the Eyepiece free.
Remove any lint or dust particles
with a soft clean cloth being careful
not to scratch the glass surfaces.
3
To re-install the Eyepiece
B
Line up the marks on the Eyepiece
with the grooves inside the EVF
shaft and attach. Turn it
clockwise 1/8 of a turn to lock in
place.
1
Slide the Viewfinder backward to its fully
expanded position and then tilt it
upward.
2
Remove the 2 screws from the EVF
Eyepiece with a screwdriver (+).
3
Turn the Eyepiece counterclockwise 1/8
of a turn.
4
Pull the Eyepiece free.
Remove any lint or dust particles with a
soft clean cloth being careful not to
scratch the glass surfaces.
5
To re-install the Eyepiece
Line up the marks on the Eyepiece with
the grooves inside the EVF shaft and
attach. Turn it clockwise 1/8 of a turn to
lock in place.
6
Replace the EVF Eyepiece screws and
tighten with a screwdriver.
• If you lose an EVF Eyepiece screw,
order Part No.XQN2+BV4FXK.
72
a
00/06/14, 13:14