Piston/Piston Rings/Piston Pin
Cylinder Head Removal
1. Clean the area above the engine before
disassembly to prevent dirt falling into the
engine.
2. Drain the engine oil (page 44).
3. Drain the radiator coolant after cooling the
motorcycle (page 143).
4. Remove the seat and fuel tank (pages 36, 37).
5. Lift the subframe to the upright position (page
39).
6. Remove the carburetor (page 132).
7. Remove the exhaust pipe (page 65).
8. Remove the spark plug (page 61).
76
Servicing Your Honda
9. Remove the camshaft holder assembly, lifters
and shims (page 69).
10.Remove the left radiator grill (1) and left
radiator lower mounting bolt/washer (2).
(1)
(2)
(1) left radiator grill
(2) left radiator lower mounting bolt/washer
11. Disconnet the primary wire connector (3).
Remove the bolts/clamp (4) and ignition coil
(5).
(3)
(4)
(5)
(3) primary wire connector
(4) bolts/clamp
(5) ignition coil
12. Loosen the radiator hose clamp (6) and
disconnect the radiator hose (7).
(7)
(6)
(6) radiator hose clamp
(7) radiator hose