Updating Images Via Airbeam; Updating The Rfid Firmware - Motorola MC319Z RFID Integrator Manual

2 - 2 MC319Z RFID Mobile Computer Integrator Guide
On the mobile computer, navigate to the
5.
update takes approximately 10 minutes. Do not remove AC power during this time.
Copy
6. MCRFIDInstall.CAB
On the mobile computer, navigate to the
7.
after the installation with RFID operational.

Updating Images via AirBEAM

Install the AirBEAM package files within
1. 30XXw61MenUPRXXXXX.apf
2. 30XXw61RFIDPkgXXXX.apf
30XXw61RFIDPkgXXXX.apf
approximately 7-10 seconds. Refer to the MC3000 Integrator Guide for more information on AirBEAM.

Updating the RFID Firmware

The RFID_FLASH utility, used to update the RFID radio firmware, is no longer provided. For related issues, contact
Motorola Solutions support.
\Storage Card
into the folder on the mobile computer.
\Storage Card
\Storage Card
30XXw61RFIDABxxxxx.zip
executes silently and the mobile computer boots after installation, which takes
folder and tap the program
folder and tap
MCRFIDInstall.CAB
in sequence:
. The
STARTUPDLDR.EXE
. The device reboots