Configure Rfid - Motorola MC319Z RFID Integrator Manual

Configure RFID

RFID is in Server Mode by default. To configure RFID to operate in Client Mode:
Invoke the MobileRFID menu, then tap
1.
RFID Configuration Window
Figure 3-10
Select the
2. Client Mode
In the field, enter the port number on which the server waits for the RFID client to communicate. The
3. LLRP Port
default is 5084.
In the field, enter the server IP for the remote host to which RFID communicates as a client.
4. Server IP
Tap .
5. Apply
Tap to close the window.
6. ok
Configure RFID
check box.
MobileRFID Functionality
.
3 - 7