Table of Contents
Advertisement
Magnifying and searching for details
If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
•
Using the remote control
1.
Press Magnify on the remote control to
display the Zoom bar.
2.
Press
repeatedly to magnify the picture to
a desired size.
3.
To navigate the picture, press MODE/
ENTER on the projector or Enter on the
remote control to switch to the paning mode
and press the directional arrows
(
,
,
4.
To reduce size of the picture, press MODE/ENTER on the projector or Enter on the
remote control to switch back to the zoom in/out functionality, and press AUTO/Auto
Sync to restore the picture to its original size. You can also press
it is restored to the original size.
•
Using the OSD menu
1.
Press MENU/EXIT on the projector or Menu on the remote control and then press
/
until the DISPLAY menu is highlighted.
2.
Press
to highlight Zoom and press MODE/ENTER on the projector or Enter on
the remote control. The Zoom bar is displayed.
3.
Repeat steps 2-4 in the section of Using the remote control above.
The picture can only be navigated after the picture is magnified. You can further magnify the
picture while searching for details.
Selecting the aspect ratio
The 'aspect ratio' is the ratio of the image width to the image height. Most analog TV and
computers are in 4:3 ratio, and digital TV and DVDs are usually in 16:9 ratio.
With the advent of digital signal processing, digital display devices like this projector can
dynamically stretch and scale the image output to a different aspect than that of the image
input signal.
To change the projected image ratio (no matter what aspect the source is):
•
Using the remote control
1.
Press Aspect to show the current setting.
2.
Press Aspect repeatedly to select an aspect ratio to suit the format of the video signal
and your display requirements.
•
Using the OSD menu
1.
Press MENU/EXIT on the projector or Menu on the remote control and then press
/
until the DISPLAY menu is highlighted.
2.
Press
to highlight Aspect Ratio.
3.
Press
/
display requirements.
,
) to navigate the picture.
to select an aspect ratio to suit the format of the video signal and your
31
repeatedly until
Advertisement
Table of Contents
