Table of Contents
Advertisement
Magnifying and searching for details
If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
•
Using the remote control
1.
Press
on the remote control to display the Zoom bar.
2.
Press
repeatedly to magnify the picture to a desired size.
3.
To navigate the picture, press Enter to switch to the paning mode and press the
directional arrows (
4.
To reduce size of the picture, you can press Auto Sync on the remote control to
restore the picture to its original size. Or you can press Enter to switch back to the
zoom in/out functionality and press
•
Using the OSD menu
1.
Open the OSD menu and go to the
2.
Press Enter. The Zoom bar is displayed.
3.
Repeat steps 2-4 in the section of Using the remote control above.
This adjustable range may vary depending on different aspect ratios.
The picture can only be navigated after it is magnified. You can further magnify the picture
while searching for details.
Selecting the aspect ratio
The 'aspect ratio' is the ratio of the image width to the image height.
With the advent of digital signal processing, digital display devices like this projector can
dynamically stretch and scale the image output to a different aspect than that of the image
input signal.
To change the projected image ratio (no matter what aspect the source is):
1.
Open the OSD menu and go to the
2.
Press Enter.
3.
Press
/
display requirements.
About the aspect ratio
1.
Auto: Scales an image proportionally to fit the projector's native resolution in its
horizontal width. This is suitable for the incoming image which is neither in 4:3 nor
16:9 and you want to make most use of the screen without altering the image's aspect
ratio.
2.
4:3: Scales an image so that it is displayed in the center of the screen with a 4:3 aspect
ratio. This is most suitable for 4:3 images like computer monitors, standard definition
TV and 4:3 aspect DVD movies, as it displays them without aspect alteration.
3.
16:9: Scales an image so that it is displayed in the center of the screen with a 16:9
aspect ratio. This is most suitable for images which are already in a 16:9 aspect, like
high definition TV, as it displays them without aspect alteration.
4.
Panorama: Scales a 4:3 image vertically and horizontally in a non-linear manner so
that it fills the screen.
5.
2.35:1: Scales an image so that it is displayed in the center of the screen with a 2.35:1
aspect ratio without aspect alteration.
,
,
,
) to navigate the picture.
DISPLAY >
DISPLAY >
to select an aspect ratio to suit the format of the video signal and your
24
.
Zoom menu.
Aspect Ratio menu.
Advertisement
Table of Contents
