Magnifying And Searching For Details - ViewSonic PJD5153 User Manual

Fine-tuning the image clarity
1. Adjust the projected image to the size
that you need using the zoom ring.
Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either the
top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, besides adjusting the height of the projector, you will need to manually
correct it following one of these steps.
• Using the remote control
Press / to display the Keystone correction
page. Press to correct keystoning at the top of
the image. Press
bottom of the image.
• Using the OSD menu
1. Open the OSD menu and go to the
2. Press Enter. The Keystone correction page is displayed.
3. Press to correct keystoning at the top of the image or press
keystoning at the bottom of the image.

Magnifying and searching for details

If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
• Using the remote control
1. Press on the remote control to display the Zoom bar.
2. Press repeatedly to magnify the picture to a desired size.
3. To navigate the picture, press Enter to switch to the paning mode and press the
directional arrows (
4. To reduce size of the picture, press Enter to switch back to the zoom in/out
functionality, and press
also press Auto Sync on the remote control to restore the picture to its original size.
• Using the OSD menu
1. Open the OSD menu and go to the
2. Press Enter. The Zoom bar is displayed.
3. Repeat steps 2-4 in the section of Using the remote control above.
This function is only available when a PC input signal is selected.
to correct keystoning at the
DISPLAY >
, , , ) to navigate the picture.
repeatedly until it is restored to the original size. You can
DISPLAY >
26
2. If necessary, sharpen the image by
rotating the focus ring.
/
Press
Keystone menu.
Zoom menu.
/
Press
to correct