Waring WJX50 Instruction Book page 9

Step 5
Slide the food pusher down the feed
chute by aligning the flat area of the food
pusher with the flat area of the feed chute.
Food pusher is marked with an arrow for
proper alignment. Continue to slide the
food pusher down the feed chute.
Disassembling Your
Waring Commercial Juice Extractor
™
Step 1
Turn the Waring
to the OFF position. Remove the plug from the power outlet.
Step 2
Remove the pulp container by tilting it slightly to remove
from base.
Step 3
Remove the lid by twisting it left to right (clockwise) as far
as it will go to disengage; then lift up cover.
Step 4
Remove stainless steel filter basket and juice bowl at the
same time by holding onto the juice bowl spout and pulp
outer edge lip while putting pressure with your thumbs
on the top rim of housing and pulling gently in an upward
motion. For best cleaning results, we recommend
cleaning the filter basket with a cleaning brush.
THE STAINLESS STEEL FILTER BASKET
CONTAINS SMALL SHARP BLADES TO CUT
AND PROCESS FRUITS AND VEGETABLES.
DO NOT TOUCH BLADES WHEN HANDLING
THE FILTER BASKET.
Commercial Juice Extractor toggle switch
™
8
Step 5