Page 1
PROFESSIONAL POPCORN MAKER WPM30/55 Series For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
IMPORTANT SAFEGUARDS When using any electrical appliance, basic safety precau- tions should always be followed, including the following: 1. READ ALL INSTRUCTIONS BEFORE USING YOUR POPCORN MAKER. 2. Unplug main power cord from outlet while not in use and before cleaning. 3.
Page 3
14. Do not place the unit on or near a hot gas or electric burner or in a heated oven. 15. Extreme caution must be paid when moving the appliance containing hot oil or other hot liquids. 16. Turn ALL switches to OFF position before disconnecting power plug from the wall supply outlet.
Page 4
PARTS 1. Housing 2. Kettle 3. Door (removable) 4. Door Panel (removable) 5. Tray (removable) 6. Measuring Spoons and Scoops 7. Heat Lamp/Light Bulb...
Page 5
ASSEMBLING PROCEDURE FIGURE 2 FIGURE 1 Hook the kettle onto the hanging Apply bottom door panel to unit. brackets in the main unit. FIGURE 4 Plug kettle electrical cord into the socket on the inner top of the popcorn housing. Screw in light bulb.
POPPING INSTRUCTIONS 1. Make sure the popcorn maker unit is unplugged before you do any of the following. 2. Before using the unit, please check carefully if voltage (120V – 60 Hz ) is suitable to your home. 3. Clean the internal surface of the kettle with warm sudsy water;...
13. Keep POP switch off if the unit is not continuously in use. 14. Keep only the Light/Warmer switch on. 15. Remove plug from power supply if the unit is not being used. 16. Repeat steps 9 to 14 for continuous popping. CLEANING AND MAINTENANCE It is strongly recommended to clean the kettle frequently to avoid burning excess oil onto the bottom of the inner pot.
Need help?
Do you have a question about the WPM30 series and is the answer not in the manual?
Questions and answers