3. FUNCTIONS OF THE CONTROL PANEL
Control panel has micom sensor.
As the buttons are pressed, the lamps indicating the selection of your desired washing program will light up.
è
§ §
Dwf-5510/5511/6010/6011
è
§ §
Dwf-5520/5521/6020/6021
Power Switch
POWER
• Press this button to turn the power ON or OFF.
Water Level Selector
WATER
• This button is used to select the water level you want.
LEVEL
Reservation Button
• If you want to reserve the finishing time of washing, use this button.
As this button is pressed, digit in display increases by 1 hour at one press.
RES.
• If current time is 8:00 am and you expect washing will be completed around 5:00 pm, press
this nine times in order to display '9'.
Course Selector
• This button is used to select the washing course according to the type of wash loads.
COURSE
• Either WOOL or SUIT course is adopted to your washing machine.
Program Button
PROCESS
• With this button, you can create new programs by combinations of process.
Temperature Selector (Optional)
• If your washer is connected to two water taps for cold water and hot water, you can select
TEMP
them. Without operation, cold water would be selected automatically.
Start/Hold
START
• With this button, you can make your washer proceed your program, or stop temporarilly.
/ HOLD
And you can also release the temporary stop by pressing this.
4
CONTROL PANEL
D AEWO O AUT OMAT IC WASHER
HIGH
MID
POWER
LOW
RES.
DAEWOO AUT OMAT IC WASHER
HIGH
MID
POWER
LOW
RES.
FUZZY
ADD
START
HOT
LIGHT
WASH
/ HOLD
HEAVY
RINSE
COLD
SUIT
SPIN
FUZZY
ADD
START
HOT
LIGHT
WASH
/ HOLD
HEAVY
RINSE
COLD
SUIT
SPIN