Adjusting The Brightness; Using The Sleep Timer; Adjusting The Output Level Of The Subwoofer - JVC TH-A55 Instructions Manual

Consists of xv-tha85, sp-pwa85, sp-tha85c and sp-tha85f; consists of xv-tha55, sp-pwa55, sp-tha55c, sp-tha55f and sp-tha55s
Hide thumbs Also See for TH-A55:
Table of Contents

Advertisement

Basic operations

Adjusting the brightness

You can dim the indications on the display window and the
illumination lamp level on the center unit.
On the remote control:
Press DIMMER.
Each time you press the button, the brightness level changes as
follows;
OFF
DIMMER1
DIMMER2
beginning)
• OFF:
Returns to the normal level.
• DIMMER1: Dims the display window and the illumination
lamp.
• DIMMER2: Dims the display window more than DIMMER1
and turns off the illumination lamp.
21
(back to the

Using the Sleep Timer

Using the Sleep Timer, you can fall asleep while listening to music
and know the system will turn off by itself rather than play all night.
On the remote control:
Press SLEEP.
Each time you press the button, the shut-off time changes as
follows;
0min (cancelled)
10min (minutes)
60min
90min
120min
beginning)
To check the remaining time until the shut-off time
Press SLEEP once.
• The remaining time until the shut-off time appears on the display
window for a while.
To change the remaining time until the shut-off time
Press SLEEP repeatedly.
• Each time you press the button, the shut-off time changes.
To cancel the Sleep Timer
Press SLEEP repeatedly until "0min" appears on the display
window.
• Turning off the power also cancels the Sleep Timer.
NOTE
• When DVD is selected as the source to play, the system can also turn
off automatically if playback is not restarted within the length of time
you have specified (Auto Standby function). (A pg. 51)
• When both the Sleep Timer and Auto Standby function are activated,
if the shut-off time set by the Auto Standby function comes earlier
than the one set by the Sleep Timer, the Auto Standby function
controls shut-off time.
Adjusting the output level
of the subwoofer
You can adjust the output level within the range from –10 to +10.
On the remote control:
Press S.WFR +/–.
NOTE
• You can also make adjustments using the choice menu shown on the
TV screen. (A pg. 50)
• The adjustments on a source take effect for the other sources.
20min
30min
150min
(back to the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents