Connecting To An Analog Component; Connecting To A Digital Component - JVC TH-A55 Instructions Manual

Getting started

Connecting to an analog component

You can enjoy the sound of an analog component such as a VCR, TV, or Cassette recorder with this system. Use RCA pin plug cords (not
supplied) for connection.
Cassette recorder
TV
NOTE
• The signals input to the VIDEO jack of the VCR IN jacks will be output only from the VIDEO jack of the VIDEO OUT jacks, not from the S-VIDEO
jack of the VIDEO OUT jacks.
• If you connect a sound-enhancing device such as a graphic equalizer between the source components and this system, the sound output through this
system may be distorted.

Connecting to a digital component

You can enjoy the sound of a digital component such as a DBS (Direct Broadcast Satellite) tuner or MD recorder with this system. Use digital
optical cord (not supplied) for connection.
Before connecting a digital optical cord,
unplug the protective plug.
NOTE
When playing a video component such as a DBS tuner;
• To listen to the sound, select "DBS" as the source to play. (A pg. 20)
• To see the picture, connect the video output jack of the component to the video input jack of the TV directly, and select the correct input mode on the
TV.
A To composite video output
B To S-video output
Red White
C To audio output
RCA pin plug cord
(not supplied)
C
Digital optical cord (not supplied)
To digital optical output
Composite video cord
(not supplied)
A
B
VCR
Center unit
Center unit
or
S-video cord (not supplied)
MD recorder
DBS tuner
14