Repeating A Desired Part - JVC TH-A55 Instructions Manual

Advanced operations
NOTE
• If you press REPEAT while stopped, you need to press
button) to start Repeat Playback.
• When the Program mode is active with a Video CD, SVCD, Audio
CD, the Repeat mode changes in the same manner.
Note that, however, in the "
programmed tracks, instead of all tracks on the disc.
• During playback in the Repeat mode of the title/chapter/group/track,
if you skip the title/chapter/group/track using
destination title/chapter/group/track is repeated.
• If appears when pressing REPEAT during DVD playback, you
cannot repeat the title or chapter because of disc contents.
When using the on-screen bar (except for MP3/
JPEG disc):
1
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2
Press Cursor /
3
Press ENTER.
The following pop-up window appears under the selected item.
4
Press Cursor
the Repeat mode.
• You can select the Repeat modes as follows:
For DVD
CHAPTER TITLE
beginning)
For Video CD/SVCD/Audio CD
TRACK ALL
beginning)
5
Press ENTER.
To turn off the on-screen bar
Press ON SCREEN.
To cancel Repeat Playback
Repeat from step 1, select "OFF" in step 4, then press ENTER.

Repeating a desired part

You can repeat playback of a desired
part by specifying the beginning
(point A) and ending (point B).
During playback
When using the A-B REPEAT button:
1
Press A-B REPEAT at the beginning of
the part you want to repeat (point A).
The repeat mode indicator "
window.
45
(play
" mode the system repeats all the
/ , etc., the
to move to
/ repeatedly to select
A-B OFF (back to the
A-B OFF (back to the
" appears on the display
2
Press A-B REPEAT again at the end of
the part you want to repeat (point B).
The repeat mode indicator on the display window changes to
" " and A-B Repeat Playback starts. The selected
part of the disc (between point A and B) is played repeatedly.
To cancel A-B Repeat Playback
Press A-B REPEAT during A-B Repeat Playback.
When using the on-screen bar:
1
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2
Press Cursor
.
3
Press ENTER.
The following pop-up window appears under the selected item.
4
Press Cursor
"A-B".
5
Press ENTER at the beginning of the
part you want to repeat (point A).
The following display appears in the on-screen bar.
6
Press ENTER at the end of the part you
want to repeat (point B).
A-B Repeat Playback starts. The selected part of the disc
(between point A and B) is played repeatedly.
To turn off the on-screen bar
Press ON SCREEN.
To cancel A-B Repeat Playback
Repeat from step 1, select "OFF" in step 4, then press ENTER.
NOTE
• When playing back a DVD, A-B Repeat Playback is possible only
within the same title.
• "A-B" cannot be selected during Program and Random Playback.
• "A-B" cannot be selected while stopped.
/ to move to
/ repeatedly to select
.