Motorola DS4208 Quick Start Manual page 2

DS4208
Quick Start Guide
http://www.motorola.com/ds4208
See Product Reference Guide for detailed information
USB
Important: Out of box, RS-232 and USB interfaces require no bar code scan setup. Bar codes are provided for complex programming or interface changes.
Scan ONE of the bar codes below
IBM HAND-HELD USB
HID KEYBOARD EMULATION
Symbol Native API (SNAPI) without Imaging Interface
To add an ENTER key after scanned data, scan all
1
SCAN OPTIONS
To add a Tab key after scanned data, scan all
1
SCAN SUFFIX
Attach Cable
Note: An audible click sounds when the shielded cable is inserted correctly.
STEP 2 -CONNECT CABLE TO A HOST
NOTE: Cables may vary depending on configuration.
Keyboard Wedge
STEP 3 - SET UP INTERFACE (Scan Host Bar Codes)
Keyboard Wedge
Scan ONE of the bar codes below
IBM AT Notebook
IBM PC/AT and IBM PC COMPATIBLE
ADD AN ENTER KEY (CARRIAGE RETURN/LINE FEED)
THREE bar codes below in numerical order.
2
<DATA><SUFFIX>
ADD A TAB KEY
THREE Enter key bar codes above in numerical order then scan all
2
7
STEP 1 - ATTACH CABLE TO SCANNER
RS-232
RS-232
Scan ONE of the bar codes below
OPOS/JPOS
STANDARD RS-232
FIVE
3
0
Remove Cable (to change interface)
IBM 46XX
IBM 46XX
Scan ONE of the bar codes below
PORT 5B
PORT 9B
3
ENTER
bar codes below in numerical order.
4
0
5
9