Related Manuals for LRS T9550 LCK
Summary of Contents for LRS T9550 LCK
- Page 1 T9550 LCK Paging System Transmitter U S E R M A N U A L Usage, Installation, Warranty and Service Information Long Range Systems, LLC 4550 Excel Parkway, Suite 200 ddison, TX 75001 800.437.4996 www.pager.net •...
-
Page 2: Table Of Contents
T9550 LCK ........ -
Page 3: Long Range Systems
NOTE: General Information The T9550 LCK is an onsite paging system used to increase efficiency in operations by alerting key staff of immediate needs. The pagers used with the system can vibrate once, twice or three times. NOTE: The T9550 LCK only works with LRS Star Pagers... -
Page 4: Basic Installation And Setup
Basic Installation and Setup Hardware Provided Each T9550 LCK transmitter kit contains: (1) Transmitter keypad (1) ntenna (1) Dry-Erase Server Board (1) 10V C 2 power supply/charger (1) Velcro strip for mounting Installation Procedure The following is the basic installation procedure C UTION: •... -
Page 5: Transmitted/Keypad Elements
0 – Used when entering pager numbers above 12 that contain a zero and when calling all pagers at once. PROG – Used to alter messaging modes and to check the battery level. ENTER – fter entering pager numbers above 12, press ENTER to send the page. ong Range Systems T9550 LCK User Manual... -
Page 6: Basic Paging Operation Guide
Basic Paging Operations NOTE: The T9550 LCK factory defaults are the most commonly used settings. ( ll units are set to vibe 1 time as the default.) Paging For pagers numbered 1 – 12: 1. Press the pager number 2. The unit will automatically send a page For pagers numbered 13 and higher: 1. -
Page 7: System Settings
Your system may or may not be shipped with the factory default setting ID = 0. However, this ID# is often used, except in cases where neighboring establishments both use LRS systems and would interfere with each other. Contact LRS to verify your Restaurant ID. (It is not recommanded to change system ID without speak- ing to LRS service departments.) To change the ID: 1. -
Page 8: Maintenance Functions
4. llow the keypad to charge for at least 12 hours. 5. Check the battery level to ensure that the battery is fully charged (see pg. 8). ong Range Systems T9550 LCK User Manual... -
Page 9: Programming Pagers
Programming Pagers Only LRS’s Star Pagers can be reprogrammed from the T9550 LCK transmitter. If you would like to assign or reassign numbers to pagers, contact LRS to verify your restaurant ID before proceeding. The following is the basic procedure for programming pagers: 1. -
Page 10: Troubleshooting
• If the display light comes on, there may be a problem with the T9550LCK power/charging sup- ply. Call LRS Customer Support to order a new power supply. • If the display still does not light, there may be a problem with the transmitter unit. Call LRS Cus- tomer Support for assistance. -
Page 11: Service Questions And Nswers
Monday – Friday 8:30 am to 5:00 pm Central Time. Weekend or Evening Emergencies: • Long Range Systems provides 24/7 live technical support. • Please keep in mind that replacement options are limited on weekends and holidays. ong Range Systems T9550 LCK User Manual... -
Page 12: Warranty
LRS, LLC products are not designed, intended, or authorized for use as components in sys- tems intended to support or sustain life, or for any other application in which the failure of the LRS, LLC product could create a situation where personal injury or death may occur.
Need help?
Do you have a question about the T9550 LCK and is the answer not in the manual?
Questions and answers