Re-Connecting To A Network; Disconnecting From A Network - Samsung Xpress CLX-419x series User Manual

Wireless network setup

Re-connecting to a network

When the wireless function is off, the machine automatically tries to re-connect
to the access point (or wireless router) with the previously used wireless
connection settings and address.
In the following cases, the machine automatically re-connects to the
wireless network:
• The machine is turned off and on again.
• The access point (or wireless router) is turned off and on again.
Canceling the connection process
To cancel the wireless network connection when the machine is connecting to
the wireless network, press and release the
control panel. You need to wait 2 minutes to re-connect to the wireless
network.
(Stop or Stop/Clear) on the

Disconnecting from a network

To disconnect the wireless network connection, press the
the control panel for more than two seconds.
• When the Wi-Fi network is in idle mode: The machine is immediately
disconnected from the wireless network and the WPS LED turns off.
• When the Wi-Fi network is being used: While the machine waits until the
current job is finished, the light blinks fast on the WPS LED. Then, the
wireless network connection is automatically disconnected and the WPS
LED turns off.
(WPS) button on
2. Using a Network-Connected Machine
201