Creating A Setup Password - Roche Accu-Chek Inform II Operator's Manual

Initial Startup

Creating a setup password

Setup Password 12:48
1 2 3
4 5 6
7 8 9
0 A-O
03/16/10
114
This screen allows you to create a password for all the
settings described in this chapter. The password ensures
that only authorized persons can make changes to the
setup.
Please note that password protection can only be
reset or modified after entering the current password.
Proper authentication is required to access the Setup
Menu. Store your password in a safe place.
1 Use the keypad to enter the password.
pm
2 Touch
password protection. (Password protection will
take effect only after the next power on.) The
display returns to the Setup Menu. Or:
3 Touch
changes. The display returns to the Main Menu.
To disable password protection:
1 Open the Setup Menu (you must enter the current
password).
2 Touch Password.
3 Delete the current password by touching
4 Touch
to save the password and enable
to exit this screen without saving any
to disable password protection.
.