JVC Exad KD-ADV38 Instructions Manual page 347

• Preset List can also be accessed through <AV
Menu> = <List>.
AV Menu
Setup
AV Menu
List
List menu icon
Using the Bluetooth audio player
Reverse/forward skip
POWER]ON
Pause
~
Select "Bluetooth Audio."
Ÿ
Start playback.
• See pages 31 to 33 for connecting a new device.
• See page 33 for connecting/disconnecting a
registered device.
• See page 33 for deleting a registered device.
When the sound is stopped or interrupted during
the use of a Bluetooth device, try the following
remedies.
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the
device again. (☞ "Connecting/disconnecting a
registered device" on page 33)
Bluetooth Information:
If you wish to receive more information about
Bluetooth, visit our JVC web site.
Enter
ENT
Enter
ENT
Turns Blue when the Bluetooth
device is connected.
Bluetooth Audio
Connected device name
Status of the device
Signal strength/Battery remainder
37
You can use the following buttons on the remote
controller for the Bluetooth phone operations. For
details, ☞ pages 8 and 9.
* 1
FLAT
3: 45
PM
* 2
Each time you press 5 ∞, the registered device
* 1
names (and "NEW DEVICE" when a new device can
be registered) appear in turn. You cannot select "New
Device" when a Bluetooth audio player is connected.
2
* Appears only when the information comes from the
device.
* 3
Indicates the button pressed. It may be different from
the operation status.
* 4
When a cellular phone with audio function is
connected, appears.
You can use the following buttons on the remote
controller for the Bluetooth audio operations. For
details, ☞ pages 8 and 9.
☞
page 43
* 3
* 4
OPERATIONS