JVC Exad KD-ADV38 Instructions Manual page 259

4
Surround On
Auto
Through
Dolby PLII Movie
Dolby PLII Music
• Auto: When multi-channel digital signals come
in, "MULTI" surround is activated.
When 2-channel or 2.1-channel signals come in,
"4CH STEREO" is activated.
• Through: All incoming channel signals are sent
to the corresponding speakers.
• Dolby PLII Movie: Activates Dolby Pro Logic II
Movie.
• Dolby PLII Music: Activates Dolby Pro Logic
II Music. You can adjust <Panorama> and
<Center Width> settings. (☞ below)
To change the <Dolby PLII Music> setting
in step 4 above...
1
Surround On
Auto
Through
Dolby PLII Movie
Dolby PLII Music
Panorama
2
Dolby PLII Music
Panorama
CenterWidth
On
• Panorama: Select <On> to add wraparound
sound effect.
• Center Width: Adjust the center image so it
may be heard only from the center speaker,
only form the left/right front speaker as a
"phantom" center image, or various combination
of these speakers. As the number increases, the
"phantom" effect becomes stronger (normally
select <4>).
3
Set
ENT
23
On the remote controller:
• You cannot change the <Dolby PLII Music>
settings using the remote controller.
* 1
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories.
2
* "DTS" and "DTS Digital Surround" are registered
trademarks of DTS, Inc.
OPERATIONS