JVC Exad KD-ADV38 Instructions Manual page 119

• Preset List can also be accessed through <AV
Menu> = <List>.
AV Menu
Setup
AV Menu
List
List menu icon
Using the Bluetooth audio player
Reverse/forward skip
POWER]ON
Pause
~
Select "Bluetooth Audio."
Ÿ
Start playback.
• See pages 33 to 35 for connecting a new device.
• See page 35 for connecting/disconnecting a
registered device.
• See page 35 for deleting a registered device.
When the sound is stopped or interrupted during
the use of a Bluetooth device, try the following
remedies.
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the
device again. (☞ "Connecting/disconnecting a
registered device" on page 35)
Bluetooth Information:
If you wish to receive more information about
Bluetooth, visit our JVC web site.
Enter
ENT
Enter
ENT
Turns Blue when the Bluetooth
device is connected.
Bluetooth Audio
Connected Device Name
* 2
Status of the device
Signal strength/Battery remainder
39
You can use the following buttons on the remote
controller for the Bluetooth phone operations. For
details, ☞ pages 8 and 9.
1
*
FLAT
15: 45
Each time you press 5 ∞, the registered device
* 1
names (and "NEW DEVICE" when a new device can
be registered) appear in turn. You cannot select "New
Device" when a Bluetooth audio player is connected.
2
* Appears only when the information comes from the
device.
* 3
Indicates the button pressed. It may be different from
the operation status.
* 4
When a cellular phone with audio function is
connected, appears.
You can use the following buttons on the remote
controller for the Bluetooth audio operations. For
details, ☞ pages 8 and 9
☞
page 48
* 3
* 4
OPERATIONS